i just bought some used aem cam gears and it says that they are for the neon 93-97. will they still work with my 99 rs? just wondering thank guys. also, how hard is the install?

i got them from a guy on here. they should work, i am just double checking. no one knows?

as long as they are designed for the 2.0, they will work.

They will work but the timing marks won't be on target for our cars. They will be on for Neon engines.

so how do i fix that problem, if i have it tuned at a dyno i think that they should be able to tune them right even if the marks are off, correct?

Yeah if you have it dynoed you should be able to adjust it.

when i put on my cam gears i had to re mark them to get every thing to line up. After taking off your stock cams compare them with the new cams. line them up so all the holes match and transfer over the line up marks. i did this and found that the marks on the new cams compared to the stock cams were off by 1 tooth total. I could not get my engine to start until i redid the marks and relined up the timing belt. hope this helps.

josh

Not my pic, but you get the idea. I had to do the same to mine.