Hey whats up. I got a rebuilt head with new valves, cleaned, 3 angle valve job the works. Well we put it in and fired her up and there are two holes (that are suposed to be there)near the drivers side that are shooting oil out of them?!? WTF?!?!?
ANY one.. anything?
Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>? turbo8u> yea i was a window licker on the short bus in junior high
#69521, "RE: New head shooting oil?!?!? HELP!" In response to Reply # 0
Never trust a drunk machinst with a drill.
Where are the holes? Pics? Description, maybe? Help me out here.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#69543, "RE: New head shooting oil?!?!? HELP!" In response to Reply # 2
I dont have pics... But they look like they should be for bolts. They dont have any threads. They are next to the intake mani runners. Closer to the driver side. One is a little bit higher up then the other.
Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>? turbo8u> yea i was a window licker on the short bus in junior high
#69544, "RE: New head shooting oil?!?!? HELP!" In response to Reply # 3 Feb-28-04 06:44 AM by XtremeRS
Originally posted by Collente I dont have pics... But they look like they should be for bolts. They dont have any threads. They are next to the intake mani runners. Closer to the driver side. One is a little bit higher up then the other. Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>? turbo8u> yea i was a window licker on the short bus in junior high
Well I just looked on my car, and if the holes you are talking about are like right under the throttle body area, and next to the intake runner, both holes sort of diagonal from each other, then both of those holes on my car have threaded cap screw plugs in them. You will have to find the right plugs somewhere, possibly the dealer, or just go to a hardware store and look for allen head cap screws of the right size. Unfortunately, I dont know the size..I'd also use teflon paste on the threads to seal it up..
Here is a pic, only good one i could find. Its the upper left hand corner of the head right?? Those two holes? Cap plugs on mine here:
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#69545, "RE: New head shooting oil?!?!? HELP!" In response to Reply # 4
Originally posted by XtremeRS
Originally posted by Collente I dont have pics... But they look like they should be for bolts. They dont have any threads. They are next to the intake mani runners. Closer to the driver side. One is a little bit higher up then the other. Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>? turbo8u> yea i was a window licker on the short bus in junior high
Well I just looked on my car, and if the holes you are talking about are like right under the throttle body area, and next to the intake runner, both holes sort of diagonal from each other, then both of those holes on my car have threaded cap screw plugs in them. You will have to find the right plugs somewhere, possibly the dealer, or just go to a hardware store and look for allen head cap screws of the right size. Unfortunately, I dont know the size..I'd also use teflon paste on the threads to seal it up..
They are diag to each other, and are right were you described them. Appreciate it!
You are the man seriously.
Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>? turbo8u> yea i was a window licker on the short bus in junior high
Search
Printer-friendly copy
1 User in Chat
