#69428, "RE: Where to get a good price on MLS hg and ARP head studs? I searched" In response to Reply # 0 Feb-26-04 08:22 AM by turbo8u
ok this is all you're going to need:
1.) you can call arp direct (805.339.2200), give them these part numbers:
Part number Count Description ----------- ----- ----------- ATP5.4LU (x4) Corner studs for head ATP6.5L (x6) Center studs for head ATP3.35L (x10) Bottom end studs APN12-1 (x20) Nuts APW34 (x24) Washers (must stack two on corner studs of head)
#69430, "RE: Where to get a good price on MLS hg and ARP head studs? I searched" In response to Reply # 1
Haha, sweet, no input needed
Although I would recommend a new tensioner as well, and check out your oil and water pump while your at it... The oil pump has been known to do some leaking... And also replace front main seal while your in there... and cam seals if your just really wanting to... and umm, thats about it...
#69432, "RE: Where to get a good price on MLS hg and ARP head studs? I searched" In response to Reply # 3
the oil pump WILL NOT LEAK if you use grey rtv around the oil pump to block seal, trust me. make sure the o ring stays in the oil pump too and yea, super20g covered the rest
good luck _________ 96 talon esi-t san clemente, ca
as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone