Go back to previous topic
Forum namePerformance/Engine
Topic subjectWhere to get a good price on MLS hg and ARP head studs? I searched
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=69425
69425, Where to get a good price on MLS hg and ARP head studs? I searched
Posted by scirio, Feb-26-04 07:56 AM
I searched. didnt find a place that even sells em. I just need everything to replace my hg. Anything else I should do while im at it? I'm @ 117K miles.:shrug
69428, RE: Where to get a good price on MLS hg and ARP head studs? I searched
Posted by turbo8u, Feb-26-04 08:21 AM
ok this is all you're going to need:

1.) you can call arp direct (805.339.2200), give them these part numbers:

Part number Count Description
----------- ----- -----------
ATP5.4LU (x4) Corner studs for head
ATP6.5L (x6) Center studs for head
ATP3.35L (x10) Bottom end studs
APN12-1 (x20) Nuts
APW34 (x24) Washers (must stack two on corner studs of head)

2.) howell has them, go here:

http://www.howellautomotive.com/Howell/Store/catalog/catalog/product_info.php?cPath=142_38_83&products_id=212

3.) modern performance has them, scroll to the bottom:

http://www.modernperformance.com/dcx/oneclipse.shtml



i owned this thread ;) let me know if you need any more help on this :thumbsup
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

69429, RE: Where to get a good price on MLS hg and ARP head studs? I searched
Posted by WickedESi, Feb-26-04 08:37 AM
This is a nice place to order from (get the complete upper gasket set, includes MLS headgasket):

http://www.buymopar.com/store/neon.html

Or you can call Fenton Dodge (Bob Kise) and just give them the part number and it will probably be cheaper.
69430, RE: Where to get a good price on MLS hg and ARP head studs? I searched
Posted by Super20G, Feb-26-04 08:40 AM
Haha, sweet, no input needed :-)

Although I would recommend a new tensioner as well, and check out your oil and water pump while your at it... The oil pump has been known to do some leaking... And also replace front main seal while your in there... and cam seals if your just really wanting to... and umm, thats about it...
69432, RE: Where to get a good price on MLS hg and ARP head studs? I searched
Posted by turbo8u, Feb-26-04 08:44 AM
the oil pump WILL NOT LEAK if you use grey rtv around the oil pump to block seal, trust me. make sure the o ring stays in the oil pump too and yea, super20g covered the rest

good luck :thumbsup
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone