Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Performance/Engine topic #68609
View in linear mode

Subject: "Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!" Previous topic | Next topic
Sean_neoFeb-17-04 03:51 AM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68609, "Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"


          

Hey guys, Im gonna try to make this short, but I could REALLy REALLy use some help here. And Im talking points to everyone who contributes! Im driving to work today, when I left my place the car seemed fine...Now Im going down the highway, about 140km, and my car jerks a little, I look the CHEC ENGINE light flashes, Im continue driving, slow down a little, and it happens a few more times, but jerks more violently then the first....So I get off at the exit, and turn down the tunes, and it sounds like a loose bicycle chain, I dont know what it is, I was thinking the baring in one of my pullys might be bad, (my accessory drive belt has snaped twice odley enough)....But even when it broke I could drive, without noise, just no power steering......PLEASE HELP ME!

Oh yeah, and for some reason, the lower the rpm's the worse it seems :S

I will be at work and reading up on responces throughout the day, I really appreciate all input!!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, 95_ESi_Person, Feb-17-04 04:27 AM, #1
RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, My9t5Talon, Feb-17-04 04:38 AM, #2
      RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Sean_neo, Feb-17-04 05:16 AM, #3
           RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, WickedESi, Feb-17-04 05:23 AM, #4
           RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, WickedESi, Feb-17-04 05:23 AM, #5
           RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Sean_neo, Feb-17-04 05:31 AM, #6
                RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Sean_neo, Feb-17-04 05:50 AM, #7
                RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Blk95GS, Feb-17-04 05:56 AM, #8
RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, hunntyr, Feb-17-04 05:58 AM, #9
RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Sean_neo, Feb-17-04 06:17 AM, #10
      RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, hunntyr, Feb-17-04 06:33 AM, #11
      RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Sean_neo, Feb-17-04 06:58 AM, #12
           RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, SILVERNT, Feb-17-04 07:07 AM, #13
           RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, ModeratoreclipzGST, Feb-17-04 07:45 AM, #14
           RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, hunntyr, Feb-17-04 09:26 AM, #15
                RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, ModeratoreclipzGST, Feb-17-04 10:27 AM, #16
                     RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, hunntyr, Feb-17-04 11:23 AM, #17
                          RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, JWoodley, Feb-17-04 03:25 PM, #18
                               RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Sean_neo, Feb-17-04 05:11 PM, #19
                                    RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, 95 GS red, Feb-17-04 05:20 PM, #20
                                    RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, ModeratoreclipzGST, Feb-17-04 08:05 PM, #21
                                         RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, Sean_neo, Feb-18-04 03:05 AM, #22
                                              RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!, ModeratoreclipzGST, Feb-18-04 03:14 PM, #23

95_ESi_PersonFeb-17-04 04:27 AM
Member since Sep 16th 2002
3260 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68612, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 0


          

it may be possible that your timing belt skipped a tooth... if you think that happened, first thing to do would be a compression test, which would show you if you have bent valves.

or you could have spun a bearing, but i'm pretty sure it has something to do with your timing.

__________________________________
-Ryan

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
My9t5TalonFeb-17-04 04:38 AM
Old School 2GNTer
963 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68613, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 1
Feb-17-04 04:39 AM by My9t5Talon



          

not quite sure...but sounds like timing, misfire, or the pulley...
don't forget to do the key dance if you can, and see if some codes pop up for you emoji

William 'Tha.Will' McGroarty

~*Roary*~
Sick Skillz

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
Sean_neoFeb-17-04 05:16 AM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68615, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 2


          

Hey guys, I know I asked for input, but now you are scaring me, shit my timing, I hope I dident bust anything, I dont think it would be timing though would it, why would it quiet down at higher rpms?

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
WickedESiFeb-17-04 05:23 AM
Donating 2GNT member
3090 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68617, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 3




          

If your timing skipped so it advanced that could cause the above ^.

I definately would not drive on it, and you should have pulled over the first time and had someone (or rented for free from autozone) a obd II code reader, or done the key dance as said above ^.


Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
WickedESiFeb-17-04 05:23 AM
Donating 2GNT member
3090 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68618, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 4




          

Let us know what code(s) your throwing.


Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
Sean_neoFeb-17-04 05:31 AM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68619, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 3


          

UPDATE:: Im going to run out to my car on my lunch break (1:30) and do the key dance, I dont have my guide here so if someone can help me out once I update again I would appreciate it.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
Sean_neoFeb-17-04 05:50 AM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68625, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 6


          

DAM DAM DAM, I can say one crappy thing about Canada is no autozone, theres not many places you can go to have your car read, and even less at no charge.....Especially for me, as they dont sell our cars up here emoji

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
Blk95GSFeb-17-04 05:56 AM
Member since Jan 22nd 2002
214 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68626, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 6


          

if you've been busting belts have you checked the rotation on all of the driven pullies? i've seen ac compressors seize, maybe that or the alternator or power steering pump is binding up the engine for a second causing the jerk, just a thought.

Travis

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

hunntyrFeb-17-04 05:58 AM
Member since Dec 27th 2003
911 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68628, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 0
Feb-17-04 06:06 AM by hunntyr

          

I had the same problem when I changed out my water pump. Dont know if you have had any work done but it definatly sounds like a skipped tooth on the timing from what you are saying. What I didnt know was that there is another timing gear on the bottom of the belt that was the problem. Mine screwed up when I put the crankshaft pulley back on after the water pump install. Also, have you ever had your timing belt replaced??? If the belt just started skipping, it may just be time to do so. If it is still running, great...Run it to a shop if you cant change it yourself and change the Timing Belt before you wind up Bending a valve and have to do a rebuild.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
Sean_neoFeb-17-04 06:17 AM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68629, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 9


          

All my belts and timing were done less then a year ago, maybe around 8 months.....Everything else seemed fine, i guess Ill get a better idea once I run the codes on my lunch...I guess I better get a tow, ready! to get to the shop later tonigh, dam now I need a rental...this is gonna be expensive!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
hunntyrFeb-17-04 06:33 AM
Member since Dec 27th 2003
911 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68631, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 10


          

Originally posted by Sean_neo
All my belts and timing were done less then a year ago, maybe around 8 months.....Everything else seemed fine, i guess Ill get a better idea once I run the codes on my lunch...I guess I better get a tow, ready! to get to the shop later tonigh, dam now I need a rental...this is gonna be expensive!


Ok....let us know what code you wind up with

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
Sean_neoFeb-17-04 06:58 AM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68633, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 10


          

Hey guys, ok I went out, and I think these are the right codes....After I did it the first time though, it woudlent work a second....

1st---- once flash, pause, two flashes (12)
2nd----one flash, pause, 4 flashes (14)
3rd---- 5 flashes (5)


god please dont tell me im fucked!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
SILVERNTFeb-17-04 07:07 AM
Member since Oct 05th 2002
4543 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68634, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 12


          

Originally posted by Sean_neo
Hey guys, ok I went out, and I think these are the right codes....After I did it the first time though, it woudlent work a second.... 1st---- once flash, pause, two flashes (12) 2nd----one flash, pause, 4 flashes (14) 3rd---- 5 flashes (5) god please dont tell me im fucked!



12=direct power input to the PCM has been disconnected within the last 50 key-on cycles

14=MAP sensor voltage

5=no code exists(could be a code 55 which states that there are no more error codes, meaning, end of code list)

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
ModeratoreclipzGSTFeb-17-04 07:45 AM
Old School 2GNTer
7335 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68636, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 13




          

the symptoms and codes are VERY similar to a problem I had with my NT a few yers ago on a trip to Florida.
Try swapping out your plug wires. Sounds like one may be bad. Pull your plugs and let us know what the condition is.
Always start with the simplest thing and work your way down...


__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

Originally posted by Avenger
When I raise the BS flag ... it's a really big fucking flag and I raise it really fucking high too.



"Never whistle while your pissing." ~The illuminatus Trilogy

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
hunntyrFeb-17-04 09:26 AM
Member since Dec 27th 2003
911 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68642, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 12


          

Originally posted by Sean_neo
Hey guys, ok I went out, and I think these are the right codes....After I did it the first time though, it woudlent work a second.... 1st---- once flash, pause, two flashes (12) 2nd----one flash, pause, 4 flashes (14) 3rd---- 5 flashes (5) god please dont tell me im fucked!


Good news....you're not fucked...much. If the codes are correct, The MAP sensor isnt really hard to do. I would just replace it.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
ModeratoreclipzGSTFeb-17-04 10:27 AM
Old School 2GNTer
7335 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68644, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 15




          

Originally posted by hunntyr
Originally posted by Sean_neo Hey guys, ok I went out, and I think these are the right codes....After I did it the first time though, it woudlent work a second.... 1st---- once flash, pause, two flashes (12) 2nd----one flash, pause, 4 flashes (14) 3rd---- 5 flashes (5) god please dont tell me im fucked!
Good news....you're not fucked...much. If the codes are correct, The MAP sensor isnt really hard to do. I would just replace it.


It IS easy but can be VERY pricey if you can't find a used one. And a bad plug wire WILL cause that code...


__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

Originally posted by Avenger
When I raise the BS flag ... it's a really big fucking flag and I raise it really fucking high too.



"Never whistle while your pissing." ~The illuminatus Trilogy

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
hunntyrFeb-17-04 11:23 AM
Member since Dec 27th 2003
911 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68646, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 16


          

Originally posted by eclipzGST
Originally posted by hunntyr
Originally posted by Sean_neo Hey guys, ok I went out, and I think these are the right codes....After I did it the first time though, it woudlent work a second.... 1st---- once flash, pause, two flashes (12) 2nd----one flash, pause, 4 flashes (14) 3rd---- 5 flashes (5) god please dont tell me im fucked!
Good news....you're not fucked...much. If the codes are correct, The MAP sensor isnt really hard to do. I would just replace it.
It IS easy but can be VERY pricey if you can't find a used one. And a bad plug wire WILL cause that code...


That's why I said not fucked much. Either way may be good for you. If you want to, do what eclipzgst suggested. I would then still run another test to make sure there are no other problems and if you can find a good used MAP sensor, buy it for future use. If not, shop for a new one.


  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
JWoodleyFeb-17-04 03:25 PM
Member since Mar 27th 2003
2335 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68660, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 17




          

I would change plug wires. John98GS sent me his stockers and I replaced all of mine and my car ran perfect. I had the exact same symptoms as you. My car would buck and hesitate under load in low rpms and had no power until 3000rpms. Change your wires IMO. goodluck.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
Sean_neoFeb-17-04 05:11 PM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68679, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 18


          

UPDATE: Well seeing as it has been a record breaking cold winter here in Toronto, and I cant be without my car I had to drop it off at my grage. My mechanic, just from what I explained and a quick look over said he believes its with the timing, he will give me an update and I can go from there, Ill let you guys know what he finds in the morning, cus I cant be without my car for days while looking at this, and with 9am-8pm shifts I dont have time to do this on my own right now.....but I guess we can wait and see.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
95 GS redFeb-17-04 05:20 PM
Member since Apr 27th 2003
107 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68680, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 19


          

might be good news to you if it is correct. i had almost the same problem thought i skipped a tooth or two on my timing belt, but it ended up just being the tensioner pully. make sure they check that out as well. but at the same time i was throwin the timing belt skipped one tooth or more code. hope this will help you a little..

bill emoji

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
ModeratoreclipzGSTFeb-17-04 08:05 PM
Old School 2GNTer
7335 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68693, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 19




          

Originally posted by Sean_neo
UPDATE: Well seeing as it has been a record breaking cold winter here in Toronto, and I cant be without my car I had to drop it off at my grage. My mechanic, just from what I explained and a quick look over said he believes its with the timing, he will give me an update and I can go from there, Ill let you guys know what he finds in the morning, cus I cant be without my car for days while looking at this, and with 9am-8pm shifts I dont have time to do this on my own right now.....but I guess we can wait and see.


your crazy. You could've stopped at any autoparts store and picked up a set of wires that will cost you $30 and you'd be w/out car for a total of 5 min.
Now, who knows how long it will be in the garage or how much it will cost.
Garage is a LAST resort IMO.
Hell, he could say it's ANYTHING and charge you whatever he wants when it could have just been the wires in the first place...


__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

Originally posted by Avenger
When I raise the BS flag ... it's a really big fucking flag and I raise it really fucking high too.



"Never whistle while your pissing." ~The illuminatus Trilogy

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                    
Sean_neoFeb-18-04 03:05 AM
Member since Jul 22nd 2003
251 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68701, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 21


          

"Now, who knows how long it will be in the garage or how much it will cost. Garage is a LAST resort IMO. Hell, he could say it's ANYTHING and charge you whatever he wants when it could have just been the wires in the first place... "


Well if thats how you feel about your mechanic then you shouldent go to him. My mechanic and my dad have been friends since they were kids, I dont need to worry about him punking me. Besides, he did my plugs and wires a year ago. From what I can tell I know its not that, it is either the timing, or the pully.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                        
ModeratoreclipzGSTFeb-18-04 03:14 PM
Old School 2GNTer
7335 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68743, "RE: Now Im stuck at work, PLEASE HELP ME< whats wrong with this thing!!!"
In response to Reply # 22




          

Originally posted by Sean_neo
Well if thats how you feel about your mechanic then you shouldent go to him. My mechanic and my dad have been friends since they were kids, I dont need to worry about him punking me. Besides, he did my plugs and wires a year ago. From what I can tell I know its not that, it is either the timing, or the pully.

Yes, that is EXACTLY how I feel about mechanics.

Originally posted by Sean_neo
All my belts and timing were done less then a year ago, maybe around 8 months.....Everything else seemed fine,

Did he change the pulleys when he did the timing belt? If he didn't, he should've...



__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

Originally posted by Avenger
When I raise the BS flag ... it's a really big fucking flag and I raise it really fucking high too.



"Never whistle while your pissing." ~The illuminatus Trilogy

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #68609 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.082 seconds, executing 60 queries.