Which wire off the 02 sensor do i hook my A/F guage too. Thank You

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

I think on my 98, it is the 31 pin on the top harness at the ecu. You have to look at the opposite side of the pic to see where the numbers are.

Hope that helps.

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting

Holy Shit i totally forgot about my chiltons manual. ok it says that Pin 30 conects to the O2 sensor and its White/Brown strip

Now thier are 4 wires coming out of the o2

1.Brown= Get Grounded
2. White/Brown Stripe= Goes to ECU
3.Brown/Red Stripe=goes to Downstream 02
4. Brown/Green = Same as number 3


So basicly do i want to tap right at Pin 30

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

Yep. Just get a blade, DO THIS SLOWLY; Slowly slice bits of the plastic that covers the wire until enough of the metal wires are exposed. Then "tap" the wire by soldering the af wire onto the 02 wire. Make sure to wrap the tapped area by eclectrical tape.

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting