Which wire off the 02 sensor do i hook my A/F guage too. Thank You

I think on my 98, it is the 31 pin on the top harness at the ecu. You have to look at the opposite side of the pic to see where the numbers are.

Hope that helps.

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting :thumbsup

Originally posted by DarkOne
Dino's dating tips, in 3 easy steps:
1) Club them over the head.
2) drag them home.
3) introduce myself in the morning.

Holy Shit i totally forgot about my chiltons manual. ok it says that Pin 30 conects to the O2 sensor and its White/Brown strip

Now thier are 4 wires coming out of the o2

1.Brown= Get Grounded
2. White/Brown Stripe= Goes to ECU
3.Brown/Red Stripe=goes to Downstream 02
4. Brown/Green = Same as number 3


So basicly do i want to tap right at Pin 30

Yep. Just get a blade, DO THIS SLOWLY; Slowly slice bits of the plastic that covers the wire until enough of the metal wires are exposed. Then "tap" the wire by soldering the af wire onto the 02 wire. Make sure to wrap the tapped area by eclectrical tape.

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting :thumbsup

Originally posted by DarkOne
Dino's dating tips, in 3 easy steps:
1) Club them over the head.
2) drag them home.
3) introduce myself in the morning.