i know that the notches on the cam gears are supposed to line up when the crank is at TDC. the thing is, yesterday i ripped apart my old motor and looked at the timing on it at TDC and the marks on the cam gears lined up, but were on opposite sides. (the outside of the cam gear as opposed to the inside) they didnt meet in the middle in other words. now, the cam gears can be used on a 2.4 and the 2.0, just a different offset, and i just used the old cams from my old motor on my new one, which way do the gears go on? with the 2.0 marking facing you? or the 2.4 markings facing you? the 2.4 side has two marks on either side of the cam gear so that makes sense but it seems the marks on the 2.0 side are on the wrong side. i even left the cam gears attached to the cams when i installed them, with the 2.0 facing me. i didnt change it. i set the timing the exact same way it came off the old motor, with the little notches on the outside of the cam gear instead of the inside. is this right?? i mean it seems odd because i know the marks are supposed to meet in the middle but they werent on my old motor. they were lined up, just on the wrong side. any help much appreciated, TIA _________ 96 talon esi-t san clemente, ca
as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone
#67404, "RE: cam gear timing mark questions" In response to Reply # 0
Originally posted by turbo8u i know that the notches on the cam gears are supposed to line up when the crank is at TDC. the thing is, yesterday i ripped apart my old motor and looked at the timing on it at TDC and the marks on the cam gears lined up, but were on opposite sides. (the outside of the cam gear as opposed to the inside) they didnt meet in the middle in other words. now, the cam gears can be used on a 2.4 and the 2.0, just a different offset, and i just used the old cams from my old motor on my new one, which way do the gears go on? with the 2.0 marking facing you? or the 2.4 markings facing you? the 2.4 side has two marks on either side of the cam gear so that makes sense but it seems the marks on the 2.0 side are on the wrong side. i even left the cam gears attached to the cams when i installed them, with the 2.0 facing me. i didnt change it. i set the timing the exact same way it came off the old motor, with the little notches on the outside of the cam gear instead of the inside. is this right?? i mean it seems odd because i know the marks are supposed to meet in the middle but they werent on my old motor. they were lined up, just on the wrong side. any help much appreciated, TIA _________ 96 talon esi-t san clemente, ca as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone
Josh what head do you have? I thought that was a typical 2L?
*Skrilla "Honest officer, I thought you were trying to race me" Talon: 1st 2.4L '97 Prelude '04 350Z
Originally posted by YourInMyMirror95GS dick teaser's should be rounded up and shot in the forehead
Originally posted by etx Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!
Originally posted by Dark0ne Thanks. Now excuse me while i fuck your sister.
#67405, "RE: cam gear timing mark questions" In response to Reply # 2
its a 2 liter head but the cam gears are the same (just backwards) as the 2.4. if you were to look at a 2gnt cam gear you'd know what i meant _________ 96 talon esi-t san clemente, ca
as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone
Search
Printer-friendly copy
1 User in Chat
