Is it normal for air to be traveling around the outside of the throttle rotor??? I just put on a 55mm body and now my Idle is anywhere from 1100-1700 Rpms..way too high, and I can hear a lot or air traveling around the throttle body plate.



"Rice guys finish last..."

http://www.geocities.com/cjwalker2/MyCar/mycar.html
420A POWER!!!!!


1996 Eclipse GS
-AEM Short Ram
-Accel 8mm Plug Wires
-GST Muffler
-AFX UDP
-F/U & R/U Strut Braces
-Motor mount inserts
-Breathers
-Clutch Restrictor mod
-Symborski Shift Kit
-55mm Throttle Body (on order)

Stereo
-Alpine CDA7364
-RF Fanatic X Components
-Infinity reference 6.5" coaxials
-JBL BP1200.1
-Infinity Kappa Perfect 12.1
-Kicker IX404
-Optima Yellow Top

**Sold** '96 GS Eclipse M5
http://www.geocities.com/cjwalker2/MyCar/mycar.html

'92 Talon TSi AWD M5
13.8 @ 97mph 1.74 60ft
http://www.geocities.com/cjwalker2/92tsiawd/chrisstalon.html

'99 Sebring Silver Z28 M6
13.3 @ 106mph 2.1 60ft
http://w

LAST EDITED ON 07-Nov-01 AT 04:19 PM (PST)

Sounds like your throttle plate is too small or needs adjustment. Try adjusting the cable first.

_____________________________________________
-Dino Yancey
Hello me, it's Me Again!


For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE:
http://www.heavenz-not-0verflowing.com/files/
No MP3 for YOU!

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

hey bro, yep. throttle plate is not sealing good. just went through a long and drawn out process with mine. exact same problem. had to send it back to Howell for fixing. now it works great. just had another guy e-mail about the same problem as well. i think howell may be dropping the ball a bit on quality with the TB plate. if you can see light around the TB plate, thats most likely the issue, could be the o-rings around the sensors, but not if it idles correctly at a stand still. if the idle goes up with any forward motion (coast down a hill or just in neutral, not in gear)its air leaking around the plate. any other Q's let me know, i tried EVERYTHING before sending it back.
tim


http://my97rs.homestead.com/mywebpage.html

I refuse to gently tip-toe through life, only to arrive at death, safely!

97 RS
Custom CAI
AF/X UDP
Bored TB-55mm
GS-T exhaust
"Super Good" plug wires
Front & Rear upper strut bars
Rear lower Stablizer bar
Front RRE lower Tie bar
Eibach Sportline Springs
Tokico shocks
Powerslot Rotors
S/S braided brake lines
Axxis Metal master pads
17" Focal Type 161's w/ Z-rated rubber
Stock shifter shortened 1.25in
Energy Suspension Shifter bushings
Custom shift plate(no more shift boot)
Indiglos
Grillcraft 3-pc. grill
V-Tech Taillight covers
Coming soon: AFC, EGT, A/F meter install, Pacesetter ceramic coated headers, 2.5" full exhaust pipeing

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

There may be a gap between the TB and TPS. I had to hack the bolts off the old TB (heads were completely stripped) and it may have shaved off a lil of the TPS housing causin a leak.. But I think that the main leak is the rotor cuz thats where all the noise is comin from.



"Rice guys finish last..."

http://www.geocities.com/cjwalker2/MyCar/mycar.html
420A POWER!!!!!


1996 Eclipse GS
-AEM Short Ram
-Accel 8mm Plug Wires
-GST Muffler
-AFX UDP
-F/U & R/U Strut Braces
-Motor mount inserts
-Breathers
-Clutch Restrictor mod
-Symborski Shift Kit
-55mm Throttle Body (on order)

Stereo
-Alpine CDA7364
-RF Fanatic X Components
-Infinity reference 6.5" coaxials
-JBL BP1200.1
-Infinity Kappa Perfect 12.1
-Kicker IX404
-Optima Yellow Top

**Sold** '96 GS Eclipse M5
http://www.geocities.com/cjwalker2/MyCar/mycar.html

'92 Talon TSi AWD M5
13.8 @ 97mph 1.74 60ft
http://www.geocities.com/cjwalker2/92tsiawd/chrisstalon.html

'99 Sebring Silver Z28 M6
13.3 @ 106mph 2.1 60ft
http://w

Make sure everythign is tight and check the o-rings on the TPS and IAC if you pinched them it will mess up your idle. First time I installed mien I did that and was diling at about 3k rpm. Make sure the air isn't leaking somewhere first and check the sensors. If it is bad Howell will takeit back and fix it.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.