#63433, "Attention Corbin about Air Fuel write up...or anyone else that nows about it"
im looking into making on of these....i would like to get all my parts from radio shak because i can get a pretty good deal from them...first of all, what is an equivalent display that i can get from radio shak....also, is it neccessary to get the enclosure, or is it just a protective box...i was planning on putting it in my gauge cluster and wouldnt need the box.... has anyone done anything like this and can anyone helm me out....thanks doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
#63438, "RE: Attention Corbin about Air Fuel write up...or anyone else that nows about it" In response to Reply # 0
I have never seen a display that would be comparable to the one in his write up. If you do find one at radio shack make sure it has the same specs as the one in his write up.
-Chris b.
......................................................................................................................... Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!
#63453, "RE: Attention Corbin about Air Fuel write up...or anyone else that nows about it" In response to Reply # 1
The first A/F's I made used displays from Radio Shack online (made by another manufacturer). They stopped carrying that line of displays, so now you are stuck. You will have to buy the display from another manufacturer. If you put everything in the gauge cluster, then you don't need the enclosure.
Corbin
'95 ESI-T HRC+FMIC+ETC...
Gimme fuel...Gimme fire...Gimme that which I desire
#63454, "RE: Attention Corbin about Air Fuel write up...or anyone else that nows about it" In response to Reply # 2
thanks, thats sort of what i wanted to hear....one more question...is the display actually a volt meter? or is it just an LCD display....can i get a cheaper just red led display? i was confused on this because you say to adjust the screw in the back...that makes me think that its actually a voltmeter sort of....let me know, thanks doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
#63455, "RE: Attention Corbin about Air Fuel write up...or anyone else that nows about it" In response to Reply # 3 Nov-21-03 05:26 AM by Corbin
Its just a voltmeter. The circuit sets its range, decimal place, and backlight. You can buy similar units from a variety of manufacturers. The little screw adjusts a potentiometer.
Corbin
'95 ESI-T HRC+FMIC+ETC...
Gimme fuel...Gimme fire...Gimme that which I desire
Search
Printer-friendly copy
2 Users in Chat
