#63373, "Vacuum leak in injector #4 port? help please!"
OK guys so ive been working on this off and on for the past 2 months. Basically my injector #4 has a vacuum leak coming from ouround the outside of the injector. Ive done the following: replaced the orings , injector, and still cant figure out what the hell is going on. car is idleing at about 1200 to 1500 rpms. not a big deal figureing the code is a key code 25 (1294 or 96)something like that. anyways can someone pleaaaase give me a hand here? thanks.
#63378, "RE: Vacuum leak in injector #4 port? help please!" In response to Reply # 2
ok let me analize this for u .... key code 25 "vacuum leak (error code diognostic readout .1294!!!!!!1294! scroll down on the list and ur gonna see the code im talking about...idle not reached. VACUUM LEAK. i can both hear the leak around the #4 injector port of the injector #4 and when i put silicone around the gap of the injector right next to the port it will bring my idle down ...useing carberator cleaneer i found the leak to be around the top part of the injector ....
Any ides of what this could be? check my original post to see what i have done. please i need help with this asap.... thanks -Jey
#63380, "RE: Vacuum leak in injector #4 port? help please!" In response to Reply # 3 Nov-19-03 02:32 PM by Uberingram
if you've replaced the rings and the injector the only thing left is the fuel rail itself. I had that problem on my truck. Leaking fuel like mad. replaced injector rings...no dice..injectors..no dice..rail. bingo.
#63396, "RE: Vacuum leak in injector #4 port? help please!" In response to Reply # 5 Nov-19-03 05:35 PM by majicalevil
This is the error i got and my idle sucks ass, and ive used two different TB....... Injector #3 control circuit Harness and connector / Injectors any suggestions? i replaced the injectors, fuel rail, fuel filter, wiring to the injectors.
Search
Printer-friendly copy
3 Users in Chat
