Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Performance/Engine topic #62514
View in linear mode

Subject: "I think im in Trouble.." Previous topic | Next topic
wpgdsmNov-03-03 07:42 AM
Member since Sep 29th 2003
15 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#62514, "I think im in Trouble.."


          

Hi guys.. heres the problem..

After about 5 mins of idling.. i see white smoke coming out of my tailpipe..and some water looking fluid coming out of the tail pipe... then about after 10 mins of idling.. i can see a little smoke coming from behind the engine on the left side.. just above the oil filler cap???? what could be wrong.. and how much to fix it??? and ideas??

thanks

Jenny

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

SILVERNTNov-03-03 07:45 AM
Member since Oct 05th 2002
4543 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#62515, "RE: I think im in Trouble.."
In response to Reply # 0
Nov-03-03 07:46 AM by SILVERNT

          

blown head gasket, a weekend if you know what you are doing, and have all the tools, sockets, torque wrench, pully puller, and alot of bandaids. a shop will charge around 500 just in labor, id shop around for the best price. while you are in there, replace the timing belt, ps/ac belt, and alt belt, waterpump.
chris

if you have any questions, email me at aemrs@hotmail.com

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
TeamMichael_97RSNov-03-03 08:04 AM
Donating 2GNT member
5866 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#62516, "RE: I think im in Trouble.."
In response to Reply # 1


          

Don't put the head back on withoutgetting it to a mxchine shop to check the deck to see if it's level or needs to be milled.



15.9 @ 86.7mph
http://www.exileracing.com

Mods List:
http://highlander.dsmpower.com/sig.htm

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
WickedESiNov-04-03 07:07 AM
Donating 2GNT member
3090 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#62578, "RE: I think im in Trouble.."
In response to Reply # 2




          

The deck (top of block) is iron an rarely needs to be machined, just remove all gasket material off of it by polishing it with 400 grit sand paper with movements in the same direction.

The head on the other hand almost always needs to be machined flat when you take it off, it's aluminum and there will be imperfections. It costs typically $20-25.

Be sure to use copper headgasket sealant on the headgasket right before you put it on.


Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #62514 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.074 seconds, executing 20 queries.