LAST EDITED ON 04-Nov-01 AT 05:37 PM (PST)

well, some of you may have read my posts about my noen foe around my town: 1 draw, 1 loss (mine). He had his girl the first time so probably would have been 2 losses...anyway, ran into him tonight at the parts store and we chated. his 420a has the intake in the front and header in the rear. hes got crane ignition something or other, cams with adj. gears, headers, 2.5in exhaust, and juiced up computer, all on top of his 150 base hp, no wonder i lost.(no boost or squeeze though)
Heres where you gurus come in: he told me some stuff that i need some info/clarification on... his stock TB was 48mm, now bored to 52mm and he says there is a direct bolt on 60mm TB from a 96 jeep. He has a computer from modernperformance.com. i didnt think we had on yet! is there that much design difference between his 420a and mine, that i cant use a spiced up computer?
im workin on a N20 kit now, but some of this other stuff wouldnt hurt either...fill me in guys. thanks!

ps-please! no "screw that, get turbo" talk. i know!!! A. theres more than one way to skin a cat, & B. im not going to be that fiancialy free for a very long time. bits and peices here and there are easy to get pass the misses, but not $3000.00+. thanx

WOW!! im kinda pissed!! there is so much more shit for the freakin neon then the eclipse. Dem fargin icehole bastages!!!!


http://my97rs.homestead.com/mywebpage.html

I refuse to gently tip-toe through life, only to arrive at death, safely!

97 RS
Custom CAI
AF/X UDP
Bored TB-55mm
GS-T exhaust
"Super Good" plug wires
Front & Rear upper strut bars
Rear lower Stablizer bar
Front RRE lower Tie bar
Eibach Sportline Springs
Tokico shocks
Powerslot Rotors
S/S braided brake lines
Axxis Metal master pads
17" Focal Type 161's w/ Z-rated rubber
Stock shifter shortened 1.25in
Energy Suspension Shifter bushings
Custom shift plate(no more shift boot)
Indiglos
Grillcraft 3-pc. grill
V-Tech Taillight covers
Coming soon: AFC, EGT, A/F meter install, Pacesetter ceramic coated headers, 2.5" full exhaust pipeing

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

The computer thing is right. but if you have an E-prom on your ecm get a lap top. Contact GUDE performance (cams throttle body, 4 into 1 header) and alot of other things. change the pistons to 10:5:1 compression from Forward motion they have everything in forged componets. Get the head decked ported and polished along with the intake manifold. Email-me for anymore ideas I got most of these things now working on 14. to 13.5 e.t.'s

Email me Badassmitsu@hotmail.com

AEM CAI, Greddy EVOlution exhaust, B&M shifter, David Brode Custom straight pipe extruded intake manifold, slight port and polished head, fidanza cam gears, crower stage 3 cams, and not tuned yet ( cam gears are on 0)

Planning to add HRC stage 4, AFX UDP, Modern performance 60mm T-b

LAST EDITED ON 04-Nov-01 AT 06:14 PM (PST)

Modern Performance sells a 60mm TB for the Neon, but it won't work on our cars. I already tried route...

Here it is though http://modernperformance.com/dcx/mpx_tb.htm





Eric Madden
99 GS

- K&N cone
- 5E plugs
- Magnecore 8.5
- GS-T exhaust
- Some electronic stuff

actually i heard gude cams suck for our cars.

Chris Dishmon
chrisdishmon@hotmail.com or
chrisdishmon@yahoo.com (pretty original, huh?)

http://www.threebrain.com/weeeeee.html

1990 GSX (14.1 in the 1/4 mile, so far)
1997 RS (it just looks neat)
http://www.homestead.com/klipzracer/index.html

I heard gude sucks period.

------------------------------------------------
98 ESi
95 GS

Me too, Gude shows no gains on a dyno is what I heard. . . either way you can piece together a head and high compression piston package that will work to give you some power. Thats what I am working on for mine. 12.4:1 compression on pump gas.




http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

ACK, Gude...... don't bother.

Michelle

We will NOT forget!
September 11, 2001


96 Eclipse Base Model
Best 14.6@93 w/60 shot
95 Talon Tsi AWD A/T

1997 Eclipse RS
1991 Eclipse GSX
1995 Eagle Talon TSi AWD
1989 Dodge Daytona 2.5 turbo
(tinker car)
1996 Eclipse base model RIP

>LAST EDITED ON 04-Nov-01
>AT 05:37 PM (PST)
>

>Heres where you gurus come in:
>he told me some stuff
>that i need some info/clarification
>on... his stock TB was
>48mm, now bored to 52mm
>and he says there is
>a direct bolt on 60mm
>TB from a 96 jeep.

Yes, but it has not been done on our motor and will not fit without some work. The neons came with two different size TB's from the factory. Our car already has a 52mm. The best thing you could do is bore it out to 55m as that is all the stock manifold can really flow without some extra work to widen it out.

>He has a computer from
>modernperformance.com. i didnt think we
>had on yet! is there
>that much design difference between
>his 420a and mine, that
>i cant use a spiced
>up computer?

yes. they are that different, hence his making 150hp stock and ours making 140hp stock.

Also, look how simple the setup Todd is running and he is busting 15.5's. If it were me, I would just copy whatever he is doing. No reason to reinvent the wheel.


MuRiX
97 Eclipse GS HRC Stage IV+
Sitting and collecting dust most of the time..
A.D.P.
http://www.murix.com

05 Mazda RX-8
06 Lotus Elise

The neon is lighter, al neons have different computers than our cars, and the DOHC version gets some of that extra power becasue it uses 93 octane (more advanced timing from the factory). So, taking one on is tough. Even a SOHC with a manual, if modded right, is tough because of the weight advantage. (I've seen one guy run 14's with his stripped down SOHC with alot of mods, still streetable). But if they have auto trannies you can usually really kill them, since they are geared worse than our auto trannies (they have 3 speeds).

Actually, I wouldn't copy what I've done "exactly." Get the 4 into 1 header instead of a 4 to 2 to 1. Don't forget, lots of launching practice, some tuning of tires and SAFC, and run on a nice cold day and you should do well. (I certainly don't have one of those "super" motors from the factory, either. Just takes a little of everything added together.)

"Keep on charging the enemy, so long as there is life."

Todd Scungio
98 RS
15.589 @ 88.22 MPH
2001 DSM Shootout Winner - NT Class

Modifications: GS-T muffler, Iceman cold air intake, AFX underdrive pulley, Brospeed header, Apexi Super AFC, Extrude Honed intake manifold, KYB AGX shocks, Powerslot front rotors, Porterfield R4S front brake pads, and occationally Mazda RX-7 rims with 225/50VR16 Michelin Pilot SX-GT tires

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

thanks guys for all the info. im not that far off form what you(todd) have for mods. Except now i just bought a NX gen X kit for 450.00, and the pacesetter header is on the way. so hopefully soon i can be a contender...



http://my97rs.homestead.com/mywebpage.html

I refuse to gently tip-toe through life, only to arrive at death, safely!

97 RS
Custom CAI
AF/X UDP
Bored TB-55mm
GS-T exhaust
"Super Good" plug wires
Front & Rear upper strut bars
Rear lower Stablizer bar
Front RRE lower Tie bar
Eibach Sportline Springs
Tokico shocks
Powerslot Rotors
S/S braided brake lines
Axxis Metal master pads
17" Focal Type 161's w/ Z-rated rubber
Stock shifter shortened 1.25in
Energy Suspension Shifter bushings
Custom shift plate(no more shift boot)
Indiglos
Grillcraft 3-pc. grill
V-Tech Taillight covers
Coming soon: AFC, EGT, A/F meter install, Pacesetter ceramic coated headers, 2.5" full exhaust pipeing

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

The bottom end of the motors is the same and so is the valvetrain. So any of these parts you can use for a Neon. Computer, Cams, intakes, header etc, don't work. The Neons also stock have the advantage of a stock 2 1/4" exhaust. So even with a headers our's reduces to 2" to mate up to the stock cat. I want to see when I do my exhaust if I can modify the collector on my header.

I'd be curious to see if a Neon ECU could work though. Anybody around Illinois with a 95? I'll bring my 95 420A Neon ECU out and we can try to wire it in...

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

One other thing, run with a set of stock 14 inch alloy rims, the car will be faster in a straight line with them on. They WILL make a noticeable difference.

And Mike, I though all Neons had 2 inch exhausts. From what I've read the new neon R/Ts with SOHC 150 hp get some of that extra HP by increasing the stock exhaust size from 2 inch to 2 1/4 inch.

"Keep on charging the enemy, so long as there is life."

Todd Scungio
98 RS
15.589 @ 88.22 MPH
2001 DSM Shootout Winner - NT Class

Modifications: GS-T muffler, Iceman cold air intake, AFX underdrive pulley, Brospeed header, Apexi Super AFC, Extrude Honed intake manifold, KYB AGX shocks, Powerslot front rotors, Porterfield R4S front brake pads, and occationally Mazda RX-7 rims with 225/50VR16 Michelin Pilot SX-GT tires

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

Do mean by switching to the DOHC muffler? which does them an increase in hp.

You can check with the guys at Neons.org but I could swear they said it was 2 1/4" and when I did the Dynomax cat-back on my Neon the piping did not look like a 1/2" difference at the adapter, and I "think" I measured the pipe at the muffler... damn now I guess I might have to crawl under mine and check... since I think she needs a cat anyway... well now I'm just rambling

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

I forgot to memntion the Neons have an overall tire diameter advantage: 185/65R-14 to our 195/70R-14. Which effectly give sthe Neon a better gear ratio.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

not just any muffler, mike but a "flowmastah"!

Chris Dishmon
chrisdishmon@hotmail.com or
chrisdishmon@yahoo.com (pretty original, huh?)

http://www.threebrain.com/weeeeee.html

1990 GSX (14.1 in the 1/4 mile, so far)
1997 RS (it just looks neat)
http://www.homestead.com/klipzracer/index.html