Im tryin to do a lil research on the cheapest price I can find like Je pistons, eagle rods, clevite bearings, arp studs, mopar gaskets, melings oil pump, stuff like that. I tried Jegs, but gave up cuz they dont carry it for the 420a, well didnt see it listed anyways. Just wondeirng if you guys knew of any sites or good places?

Howell sells a bottem end kit for $1099 but their pistons are 8.6 i want 8.8

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

i got em for 1100$ shipped

je or weisco, eagles, clevite 77 bearings, melling oil pump and felpro gaskets...

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Order from Bill and get this, he'll have the parts shipped to you from his distributor so you'll get them sooner. Bill is teh shizz. I am a very satisfied customer.

How are those felpro gaskets to Mopar front and rear seal? Also are the rings included with the pistons? All thats missing from that is the studs..what about those

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

the felpro is a nice gasket set the mopars cost the same just takes me 1-3 weeks for them to arrive when fenton is out of stock was too much hassle and i actually like the felpro a bit better..


now why would a sell a bottom end kit without rings that would suck not having a working motor....

IE yes they are in there

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Can you get ARP main and head studs too to finish up the package? How much for them?

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

summit has better prices on arp then i do i cant buy as much as them...

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

from a few buds of mine who ordered 1st from howell, for the bottom end kit with the je 8.6 pistons, and then ordered the je pistons from hrc 8.8 both are the same exact things.

Michael
99gs
HRC Stage IV 8-Injector Setup
2GNT Member #32

Hey Michael... when are we going to build this beast? You love some of the things I've got in mind for it... I've got a few tricks up my sleeve for this one.

edit: Clarification- the Michael I'm talking to is xEclipseRacerX.

>Hey Michael... when are we going to build this beast? You
>love some of the things I've got in mind for it... I've got a
>few tricks up my sleeve for this one.
>
>edit: Clarification- the Michael I'm talking to is
>xEclipseRacerX.

Hmmm...you got me all anxious and feeling evil inside now lol...I was talking to your bro, and I said I might come over Friday...is that cool with you? You get off work at what 4? Im thinking i might get my maching work done at napa...not unless you know where else to go? Matt told me about napa...and i just so happen to have a good freind that works there, so we'll see what price he gives me for a .020 bore,hone, balance, blueprint, and resurface.....but man...I cant wait to do this...im probably just gonna end up buying the bottem end kit from Bill. Still want to try and do atleast a stg 1 turbo kit at the same time to take advantage of this low compression.


1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

I just dont know what size bearings im gonna need from Bill till we drop the crank and see how f'ed up it is.

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

Machine work will probably include bore and hone with torque plate, deck block, clean block, magnaflux, remove and replace freeze and galley plugs, check align bore, and clean and polish crankshaft. We'll balance the internals and blueprint the assembly ourselves... sound good?

Friday night I'm going to the DMB concert at Amsouth Amplitheatre. Saturday would be good I think. I get off work at 3:00 in Brentwood.

I think we'll be okay to use standard size bearings... gotta check that crank though.

How much is the bottom end kit from Bill? We may be better off buying local... I have a guy that can get me great deals on 420A internals. I can get MOPAR gaskets within 24 hours at discount cost. And ARP head studs... main studs aren't a big deal but we can use them if you want.

We need to talk dude... I'll let you know if Saturday is okay.

dougie give me a call maybe we can work outa deal..

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Sat. Night....no can do...its the 1yr anniversary with the gf, and the last thing she would want me to do is work on my car , but yea we'll talk

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

Ok... maybe Sunday... be better for me anyways... how about you? I'll call you this week Bill.

I have to work at 5...but if your willing to start in the morning...do you think we can atleast just pull the block & check the crank so i know 4 sure what size bearings I need...and so I can start ordering parts soon? You can tell me this local place to get parts too

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition
Check Out My Site For Pix
http://mywebpages.comcast.net/EclipseRaceR/MyEclipse/VIS%20CF%20Hood/

MP keeps a whole line of custom JE pistons in stock for the 420A in addition to rods from Eagle and bearings from main bearings to rod bearings in stock.

Check out our website, we are slowly but surely updating it and we have them in stock. Give us a call if we can be of help- we can usually ship the same day you order by Fedex !

David Barrera
2003 Dodge SRT-4 Black
www.modernperformance.com

"Flip ya, flip ya for real."

OK, my turn to plug:

HRC has a sale right now on JE Pistons and Rings / Eagle Rods combo.

http://www.hahnracecraft.com/auto/sales/sales.htm

BHjr

watch out for the rath of mototool you guys did a shameless plug too uho here he comes


anyways...

Whats up dave and Bill Hahn ?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

just fyi. i bought most of my internals from hrc.
Michael
99gs
HRC Stage IV 8-Injector Setup
2GNT Member #32

You guys all from Washington state? Arent you from Spokane Bill?

i am, noone else that posted is

Bill

doug is a customer of mine

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.