Ok i got some of those cam gears that have to wrong setting how did u guys go about putting the right marks on the cam gears also does the puller that i used for my stock udp work for my AFX udp its on of the 3 arm pullers. Thanks
#57357, "RE: Tips for remarking AEM cam gears" In response to Reply # 0
What I did was line up the stock cam gear with the aftermarket one (place one on top of each other, with the hole for the dowel pins in the same position), and VERY CAREFULLY etch a mark on the aftermarket cam in the exact place where the mark is located on the stock gear.
And, for the pulley, I'm guessing you could use the gear puller, but you should really look into using a harmonic balancer puller which has long bolts that come with it, which will screw into the threaded holes onthe AFX pulley. You can usually find a harmonic balancer puller at autozone, and they are easier to use than the 3 jaw gear puller.
Originally posted by KaptainMyke this is the greatest topic posting i have ever seen, in my entire life on the internet.
great story great attempt at racism dino goes batshit i spilt my juice i can't see my keyboard to type
this is great.
Originally posted by nappyjim make sure you let her know what the dillyo is. just tell her you was the peanut butter and she was the jelly and that night, God decided to make a peanut butter n jelly sandwhich. But let her know God dont eat peanut butter and jelly sandwhiches everyday.
Search
Printer-friendly copy
1 User in Chat
