has anybody out there ported their own throttle body?

if so, did you make a new throttle plate and just widen the pin?

some info on this would help...
__________________________
...just my $.02
95 GS

____________________________
My $.02
95 GS

I did mine with a dremel tool. I didn't change the butterfly valve, I just made the inside bigger because I gets smaller and then bigger on the inside.



KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

did you have any gap between the edge of the throttle plate the the inner diameter of the TB?? if so, did it still idle okay??
__________________________
...just my $.02
95 GS

____________________________
My $.02
95 GS

New Butterfly valve and 55mm all the way through it.



KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

how much did the pin and plate run you??
__________________________
...just my $.02
95 GS

____________________________
My $.02
95 GS

Just pay the $100 to have it done right and via lathe
Since I cant use photopoint IMAGINE THIS:
Star turbo with E-trim and HKS BOV
Starion FMIC/2.5" piping
Joe P MBC
Apexi SuperAFC
Ross Pistons/total seal rings
Ported and matched intake manifold
AFX 55mm TB, FMM and UDP
2.5" downpipe back exh/Hayame muffler
Crane wires/Denso Iridium plugs
Centerforce DF clutch
KYB AGX struts/ST springs, UPR FSB, F&R camber kits
17" ADR lightnings/toyo FZ4 215/45/17
97' eclipse front end/projectors
Autometer gauges
Panasonic head unit/ Sony X-over
MB Quarts all around/JL stealth sub
Hifonics/MTX Thunder amps
XX brand alarm/Varad hyper green led

Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

Yeah I sent off to Howell for $100 well spent in my opinion. They had it done quickly as well.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.