#50306, "For those considering getting injectors cleaned from RC Engineering...."
I bought a set of ford 440cc/min injectors from ebay. I never really trusted its flow since they are supposevely "new" but you know how ebay is hehe
So i sent it to rc engineering for their standard injector cleaning and balancing. Cost me $107 bux shipped from Cali to Delaware UPS 3-day. Turnaround time was only 1 day.
Here are the flow specs BEFORE and AFTER just to give you guys an idea of how bad these "new" injectors are from ebay hehehe
An overall AFTER CLEANING lbs/hr @ static fuel pressure: 165.90 (from a previous 163.05) These injectors were all over the place (with over 10cc/min differences between injectors!)
The ford injectors came back clean as you could never think injectors could be (i'll post pics later). New o-rings, very well packaged, and with a very detailed spec sheet on the before/after containing data such as the one above as well as B.S.F.C at .65, .55, and .50 for BEFORE and AFTER.
I say for $100, it is a deal. Lesson learned here is to never trust injectors bought 2nd hand (and even brand new injectors have discrepancies).
_________________ Vinnie Lima vinnie.lima@jvllogistics.com AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
#50317, "RE: For those considering getting injectors cleaned from RC Engineering...." In response to Reply # 0
today i drop my stock 235cc injectors at Rc in Torrance since i live sorta local 30-45mins. i drop it off around 9am and by 4pm i get a call its ready for pick up. so tommorow morning i will go pick mine up. total for mine is $96 with all the info as you got. Michael 99gs HRC Stage 2 @12psi Stage 3 process begins gathering parts for rebuild 2GNT Member #32 http://www.dreamwater.net/purplebeast
Search
Printer-friendly copy
0 Users in Chat
These injectors were all over the place (with over 10cc/min differences between injectors!)
