well whats a fair price to build a spare head? no port/polish or so.
if you had it done, what did you get installed, and how much was it?valves, guides,seats etc etc
thanks guys
Michael 99gs
HRC Stage 2 @12psi
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

Pull/install valves about $50
If the valves/valve seats need to be machines add another $100
Get the head cleaned up around $20
Another $30 to $40 for milling if needed to flatten head or if desired for compression boost.

For parts give Bob Kise @ Forum Dodge a call.

Get the valves cover gasket, spark plug well gaskets, cam seals, valve stem seals, you'll need a head gasket



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

also get the eaton/pt or the 2.7L lifters,etc.. from him
or even blackdog

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

thanks guys. i got all the parts except valves..
Michael 99gs
HRC Stage 2 @12psi
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

for a set of stock valves i paid $140 and $160 for the cleaning, valve and seal install.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

im going to get me some ss swirl valves. hmm is the 160 with a valve job?
for a head to build is,
valve seats, valve guides, valves, valve springs and retainers, rockers and lifters right? besides cams of course...
Michael 99gs
HRC Stage 2 @12psi
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast