| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Building a Head price? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=48611 |
48611, Building a Head price?
Posted by pn0ymahal, Apr-07-03 07:18 PM
well whats a fair price to build a spare head? no port/polish or so.
if you had it done, what did you get installed, and how much was it?valves, guides,seats etc etc
thanks guys
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32
http://www.dreamwater.net/purplebeast
|
48636, RE: Building a Head price?
Posted by Michael_97RS, Apr-08-03 04:00 AM
Pull/install valves about $50
If the valves/valve seats need to be machines add another $100
Get the head cleaned up around $20
Another $30 to $40 for milling if needed to flatten head or if desired for compression boost.
For parts give Bob Kise @ Forum Dodge a call.
Get the valves cover gasket, spark plug well gaskets, cam seals, valve stem seals, you'll need a head gasket
15.9 @ 86.7mph
Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC
|
48638, RE: Building a Head price?
Posted by mcgyvr, Apr-08-03 04:59 AM
also get the eaton/pt or the 2.7L lifters,etc.. from him
or even blackdog
|
48671, RE: Building a Head price?
Posted by pn0ymahal, Apr-08-03 01:31 PM
thanks guys. i got all the parts except valves..
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32
http://www.dreamwater.net/purplebeast
|
48686, RE: Building a Head price?
Posted by juggalo, Apr-08-03 04:40 PM
for a set of stock valves i paid $140 and $160 for the cleaning, valve and seal install.
|
48699, RE: Building a Head price?
Posted by pn0ymahal, Apr-08-03 07:55 PM
im going to get me some ss swirl valves. hmm is the 160 with a valve job?
for a head to build is,
valve seats, valve guides, valves, valve springs and retainers, rockers and lifters right? besides cams of course...
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32
http://www.dreamwater.net/purplebeast
| |