What should I use to clean it out?????




Performance: Stuff that makes my car run better or go faster

Looks: Stock because looks doesnt make my car go faster or run better

Weight Reduction: CF Hood, No A/C or Powersteering Accessories, No rear interior

carb cleaner works wonders

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

take it off and use carb cleaner (as mentioned ^^^) + a wire brush and a sponge. it will be glowing once you are done. i cleaned mine at roughly 135k miles, and it took me about 20 minutes to get every spec of gunk off of it.

:shhh: i do cocaine :/shhh:

i've been told by satan NOT to use carb cleaner!
they said it will damage the injectors. There is fuel injector cleaner out there that you should use instead. Makes sense considering we have injectors not a carb.

jeff

Fuel injector cleaner is stuff you put into your fuel tank?

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Autozone sells cans specificly for the throttle body. If you ask me though, it's the same as carb cleaner.

1996 Eclipse GS *Tanabe Racing Medallion exhaust-Iceman intake-Greddy Headers-Top Fuel UDP-Front strut tower brace-MSD 8.5mm wires-NGK plugs-ES mm inserts-APEX Short shifter-Tenzo 1.5" lowering springs-F&R crossed drilled/slotted rotors-Tokico Blues

carb cleaner EATS o-rings. (thats a NO-NO)
get mopar combustion chamber cleaner or TB cleaner from autozone.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

The carb cleaner shouldn't touch any o-rings... but if you take the TB off to clean it, then it won't matter. Also wipe down what you can get of the inside of the manifold, the EGR dumps some nice cabon and gunk in the manifold behind the TB.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

Yea I was going to take it off anyways just to make it easier to clean and be precise....I really appreciate your feed back....so an over all consesus is not to use carb cleaner then?????




Performance: Stuff that makes my car run better or go faster

Looks: Stock because looks doesnt make my car go faster or run better

Weight Reduction: CF Hood, No A/C or Powersteering Accessories, No rear interior

Nope. I think Carb cleaner works wonders. Especially if you take the TB off. Carb Cleaner and a wire brus

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

as mentioned above, it doesnt matter what you clean it with if its off the car. i personally used carb cleaner because it was cheap and it worked really well.

:shhh: i do cocaine :/shhh:

I used STP throttle body cleaner to clean mine, and it worked great. Just spray on, use a brush to get the stubborn stuff off, wipe it down, and your done.





Jaeson
'96 Eclipse RS

16.537 @ 84.00 mph, 2.489 60'