Go back to previous topic
Forum namePerformance/Engine
Topic subjectCleaning of throttle body
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=48116
48116, Cleaning of throttle body
Posted by Dinkjs, Apr-02-03 05:24 PM
What should I use to clean it out?????




Performance: Stuff that makes my car run better or go faster

Looks: Stock because looks doesnt make my car go faster or run better

Weight Reduction: CF Hood, No A/C or Powersteering Accessories, No rear interior

48117, RE: Cleaning of throttle body
Posted by KSeclipse, Apr-02-03 05:25 PM
carb cleaner works wonders
48122, RE: Cleaning of throttle body
Posted by SPL_Eclipse, Apr-02-03 06:22 PM
take it off and use carb cleaner (as mentioned ^^^) + a wire brush and a sponge. it will be glowing once you are done. i cleaned mine at roughly 135k miles, and it took me about 20 minutes to get every spec of gunk off of it.
48125, RE: Cleaning of throttle body
Posted by jeffgsu, Apr-02-03 06:43 PM
i've been told by satan NOT to use carb cleaner!
they said it will damage the injectors. There is fuel injector cleaner out there that you should use instead. Makes sense considering we have injectors not a carb.

jeff
48128, RE: Cleaning of throttle body
Posted by WickedESi, Apr-02-03 07:11 PM
Fuel injector cleaner is stuff you put into your fuel tank?
48145, RE: Cleaning of throttle body
Posted by raul, Apr-03-03 02:41 AM
Autozone sells cans specificly for the throttle body. If you ask me though, it's the same as carb cleaner.
48148, RE: Cleaning of throttle body
Posted by mcgyvr, Apr-03-03 02:46 AM
carb cleaner EATS o-rings. (thats a NO-NO)
get mopar combustion chamber cleaner or TB cleaner from autozone.
48151, RE: Cleaning of throttle body
Posted by Michael_97RS, Apr-03-03 02:56 AM
The carb cleaner shouldn't touch any o-rings... but if you take the TB off to clean it, then it won't matter. Also wipe down what you can get of the inside of the manifold, the EGR dumps some nice cabon and gunk in the manifold behind the TB.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC
48157, RE: Cleaning of throttle body
Posted by Dinkjs, Apr-03-03 03:13 AM
Yea I was going to take it off anyways just to make it easier to clean and be precise....I really appreciate your feed back....so an over all consesus is not to use carb cleaner then?????




Performance: Stuff that makes my car run better or go faster

Looks: Stock because looks doesnt make my car go faster or run better

Weight Reduction: CF Hood, No A/C or Powersteering Accessories, No rear interior
48165, RE: Cleaning of throttle body
Posted by jerseystyle1, Apr-03-03 04:28 AM
Nope. I think Carb cleaner works wonders. Especially if you take the TB off. Carb Cleaner and a wire brush:thumbsup
48185, RE: Cleaning of throttle body
Posted by SPL_Eclipse, Apr-03-03 10:46 AM
as mentioned above, it doesnt matter what you clean it with if its off the car. i personally used carb cleaner because it was cheap and it worked really well.
48196, RE: Cleaning of throttle body
Posted by EclipzeGamer, Apr-03-03 02:21 PM
I used STP throttle body cleaner to clean mine, and it worked great. Just spray on, use a brush to get the stubborn stuff off, wipe it down, and your done.





Jaeson
'96 Eclipse RS

16.537 @ 84.00 mph, 2.489 60'