hey everyone. Im starting to actualy mod the stupid slow talon, and i want to build a CAI. I can't seem to find an appropriate sized filter for the end of a custom (probably pvc) pipe except for APC red and blue gross blech from pep boys. any ideas where to get a properly sized K&N filter?

esi with 50k great shape for sale, afx udp, stock otherwise.

autozone carries a crapload of K&N parts. found one for my 88 camaro, 78 dodgetruck w/ CAI from the factory, and for my talon. they are your best bet, if they dont have it then trty a high performance domestic shop. they have lots of K&N goodies as well.

slow ass talon? man drive a DX. thats slow. talon esi, not slow.
not F-A-S-T. but NOT slow.

________________________
-i tweak therefore i am.

about how much did all the pvc and elbows + filter cost you?

Goog

Formerly Joe B Slow
Hi.
AIM: brohymn411
Email: brohymn411@hotmail.com

ph33r me im l33t: I'm like
ph33r me im l33t: petting the tranny cooler
ph33r me im l33t: it looks like a baby intercooler
ph33r me im l33t: it's so cute
ph33r me im l33t: seriously man
ph33r me im l33t: it's like
ph33r me im l33t: I flow shit
ph33r me im l33t: what now
ph33r me im l33t: I cool that bitch down

I think I paid like 15 for all the pipe, elbows, and couplers. Then I paid another $40 for the filter. I am sure you could find a cheaper filter online but I was in a hurry and got it at Autozone.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

go to the K&N site: http://www.knfilters.com/universal/univrndstrt.htm to find your size....

i ordered mine from: http://www.martelbros.com/cgi-bin/store/ws400CS.cgi

they were a featured online vendor on the K&N site. Shipping was free and it took about 5 days to get it. So i got a replacement for my old K&N on my AEM CAI for about 28 bucks. pretty cheep.

You're gonna make a CAI out of PVC pipe and you're concerned that the APC filter looks crappy?

when i make stuff.....i make it well. I don't want an apc filter because they have ugly "anodized" shit and they probably dont filter well. THats all. I guarantee my pvc won't look like shit.

esi with 50k great shape for sale, afx udp, stock otherwise.

hey you guys. I like my pvc CAI extension and my apc filte

you can't see it while looking at the rear of my car Bwhahaha.

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

pvc probably deals with heat good...
it's not that crappy of an idea
jef

I actually used 3" ABS. worked rather well, if I do say so myself.

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

I got bored today and started playing around with a PVC CAI. I am getting a K&N filter tomorrow from Advance Auto Parts. They actually had the one I needed. The piping is 3" and the filter will fit right on. I took some pics tonight. If it works out I might paint it to match the car and sell my AEM I have. We shall see. Here are some pics...








Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

exactly! whats wrong with that. i assume its all just 3 inch pvc....the gasket on the top is? how are you keeping it in place...

esi with 50k great shape for sale, afx udp, stock otherwise.

Right now its all just dry fitted. I will be gluing the pvc tonight and the adapter rubber piece thats on the TB will be clamped with hose clamps. It actually was bigger than that when I started. I had to cut about 3/4" off of each side. I will prolly fiberglass and sand it all smooth then paint it to match.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

what pieces do you have. a all parts 3" i assume. 90 degree elbow....strait pipe cut to length. the 30 degree bend....more strait.....then whats for the bottom.....? and how big is your filter?

esi with 50k great shape for sale, afx udp, stock otherwise.

Yea, seriously. You need to make a write up of exactly how you did all that! looks nice...not TOO ghetto

Joseph

Formerly Joe B Slow
Hi.
AIM: brohymn411
Email: brohymn411@hotmail.com

ph33r me im l33t: I'm like
ph33r me im l33t: petting the tranny cooler
ph33r me im l33t: it looks like a baby intercooler
ph33r me im l33t: it's so cute
ph33r me im l33t: seriously man
ph33r me im l33t: it's like
ph33r me im l33t: I flow shit
ph33r me im l33t: what now
ph33r me im l33t: I cool that bitch down

also, i heard the new v2 intake from aem is like 3 inches or what not. doing this saves you 200 bucks again. just fiberglass it and sand it down so it looks like one piece, and it will actually look even nicer.
later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

Yeah thats what I was thinking....it could look really good!!

The bottom piece is another 30 degree elbow. Makes it come out almost completely horizontal. I suppose you could put another 90 on and angle the filter up a bit if you were worried about hydrolock. I will try and get a write up done on it. I just got the filter on. Its alot bigger than the one that came on the AEM. Its like 8" long and goes right by the opening in the bumper. Fills up the space really nice.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

what filter is it? ive been trying to find a K&N the proper size but it looks like as with everything else, its time to order online. what filter should i get?

esi with 50k great shape for sale, afx udp, stock otherwise.

Well mine is just an 8" long conical filter with a very slight taper from about 5" down to 4.5" or so. I can get a part number this evening for you if you would like. It fits very nicely. Tonight I will have to jack up my car and get a pic from the underside.

This morning was the first time I have driven it with the new intake. It definitely has not decreased my power from the AEM. To tell you the truth it almost feels like it has a slightly better pull.(Its probably in my head though)

All in all I am very happy with it. I will be making another one to make all pretty tonight or tomorrow. I will then go ahead and take some pics and measurements for a writeup.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

hmmm... interresting, I might do that, but how smooth is it inside? I would think that where the pieces join inside the pipe might cause some turbulance in the air flow... I'm not sure, so don't bitch at me... Or does everything seat flush inside the pipe where all of the edges meet?

__________________________________
-Ryan

The edges all meet really well inside the pipe. Nice and smooth as long as the pipe is cut pretty straight and seated really well inside the elbows.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

Here is my writeup if you are interested.

http://www.joehoward.net/ebay/cai/PVCCAI.htm

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

link isn't working

and i was just about to write it all down

esi with 50k great shape for sale, afx udp, stock otherwise.

Fear using PVC on your CAI.. I've read from a few sites not to use PVC.. use ABS plastic because its stronger and more heat resistant.

http://www.tercelonline.com/board/viewthread.php?tid=2962
"tht with ABS..it will noet hold heat like steel or aluminum would...in my opinion ABS is the material of choice..much lighter than pvc will ot harm ur motor like pvc...wht ever u use dont use pvc pinping..."
heh this guy can't spell

http://jdmfan.com/technical/performance/custom_intake/
"DO NOT use PVC pipe to make the intake piping. PCV piping is not heat tolerant and will melt and release toxic fumes when exposed to under hood temperatures. Plus the ID of PVC piping is much smaller than 2.5" because it is very thick. The Iceman systems are made of thermoplastic, which is a special plastic formulated to take heat. PVC piping is not so please do not use it."
Better link - this site shows exactly how to make a CAI

http://www.dodgedakotas.com/boards/per/1517.html
"PVC was not enginiered to take temps. much higher then what a home water heater puts out. I have seen people try to splice two coolant hoses with PVC and it always split on the seam and deforms."

I don't know how ppl have done with PVC.. maybe its fine and maybe not.. but this is just a heads up and something to think about.

anyone know where to get the same dimentions in abs plastic (i didn't find it so thats why i looked to PVC) but abs would be much better!

anyone, anyone?

esi with 50k great shape for sale, afx udp, stock otherwise.

the link is down, can you please fix it. im working on a pipe but it doesn't fit quite right yet. link link link fixeeeeeeeee please

esi with 50k great shape for sale, afx udp, stock otherwise.