hey i just got a B&M short shifter. i'm waiting to put it in, but i'm wondering what the difference is between 50% and 35% reduction. is it the height? what exactly does it do? and which do you guys recommend?
#4425, "RE: 50% or 35% reduction" In response to Reply # 0
It is not the height it just changes these pivot points on bar. trust me you want the 50%. You'll notice the the 35% but thern you will want more(as all enthusiasts do). On top of that the B&M is shorter than stock but that contributes to the stick throw of the 35% and 50%, so just the 50%. I would also say cut out about a 1/2 inch from the B&M for an even shorter throw. I removed an inch on mine.
Skrilla '97 Base Talon NA "Technology: The Only Replacement for Displacement" "Peace and Turbo Grease"
*Skrilla "Honest officer, I thought you were trying to race me" Talon: 1st 2.4L '97 Prelude '04 350Z
Originally posted by YourInMyMirror95GS dick teaser's should be rounded up and shot in the forehead
Originally posted by etx Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!
Originally posted by Dark0ne Thanks. Now excuse me while i fuck your sister.
#4426, "RE: 50% or 35% reduction" In response to Reply # 2
I'm runnin the 50% and about 2" cut off the top. The throw is pretty short at the stock B&M height, but It gets in the way of seein the stereo.....can't have that now can we. __________________________ ...just my $.02 95 GS
Search
Printer-friendly copy
1 User in Chat
