Ok I finaly got my 95 Neon Non Modular Flywheel and CM Stage 3. Now I am looking at the fly wheel and it has 6 bolt holes around the outside edge. My question is.... where am I supposed to get these bolts from? I don't think we have the same kinda bolts on our driveplate.. do we? I'm lost I thought this was a direct bolt on? Please some 1 help me soon.. as I am supposed to be installing this tommorrow morning... ThanX
xlordzeusx@earthlink.net



MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html

neeed to go to the dealer and pic them up or any parts store

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

is there any way you can tell me what size these bolts are? or any way that can just go pick these things up? I wish someone would have told me this before I need these things like in the morning or at least by the afternoon. Does any one know the size and what kind or whatever these bolts are .. and where I can pick them up at on a sat?


MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html

Some 1 ..anyone..? What about the 8 Bolt in the center? do I have to buy those to or are they the same bolts as on my 97 eclipse?


MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html

bump.........
comon I know some body has done this mod and knows!!!
MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html

8M 1.25 I think...I don't know the length though, I just got them from the dealer.

The bolts that are in your current clutch have the same thread but need to be longer. (not too long though)

FYI

Flywheel torque specs: 70ft lbs tighten in a crisscross pattern.

Clutch torque specs: 21ft lbs, again tighten in a crisscross and a few turns a time then move to the next bolt. You want to tighten it evenly so you don’t warp the pressure plate.

>8M 1.25 I think...I don't know the length though, I just got
>them from the dealer.
>

8M 1.25 X 17

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

If you buy these from a parts store and pull out of the bulk bin. PLEASE make sure you get hardened bolt, grade 10.9. Easiest is to call dealers in the area and see if anybody has them in stock.



15.9 @ 86.7mph
97 Eclipse RS

Injen CAI, 55mm TB, P&P Intake, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC