Go back to previous topic
Forum namePerformance/Engine
Topic subjectNon-Modular Install Help..... Fast Please!
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=43830
43830, Non-Modular Install Help..... Fast Please!
Posted by DSM_Tuner, Feb-07-03 12:59 PM
Ok I finaly got my 95 Neon Non Modular Flywheel and CM Stage 3. Now I am looking at the fly wheel and it has 6 bolt holes around the outside edge. My question is.... where am I supposed to get these bolts from? I don't think we have the same kinda bolts on our driveplate.. do we? I'm lost I thought this was a direct bolt on? Please some 1 help me soon.. as I am supposed to be installing this tommorrow morning... ThanX
xlordzeusx@earthlink.net



MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html
43831, RE: Non-Modular Install Help..... Fast Please!
Posted by MotoFool, Feb-07-03 01:13 PM
neeed to go to the dealer and pic them up or any parts store
43833, RE: Non-Modular Install Help..... Fast Please!
Posted by DSM_Tuner, Feb-07-03 01:21 PM
is there any way you can tell me what size these bolts are? or any way that can just go pick these things up? I wish someone would have told me this before ;( I need these things like in the morning or at least by the afternoon. Does any one know the size and what kind or whatever these bolts are .. and where I can pick them up at on a sat?


MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html
43839, RE: Non-Modular Install Help..... Fast Please!
Posted by DSM_Tuner, Feb-07-03 03:19 PM
Some 1 ..anyone..? What about the 8 Bolt in the center? do I have to buy those to or are they the same bolts as on my 97 eclipse?


MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html
43847, RE: Non-Modular Install Help..... Fast Please!
Posted by DSM_Tuner, Feb-07-03 04:29 PM
bump.........
comon I know some body has done this mod and knows!!!
MODS:
Click on link to see mods
http://tunedmotorsports.tripod.com/kalexander.html
43859, RE: Non-Modular Install Help..... Fast Please!
Posted by JustOne, Feb-07-03 06:56 PM
8M 1.25 I think...I don't know the length though, I just got them from the dealer.

The bolts that are in your current clutch have the same thread but need to be longer. (not too long though)

FYI

Flywheel torque specs: 70ft lbs tighten in a crisscross pattern.

Clutch torque specs: 21ft lbs, again tighten in a crisscross and a few turns a time then move to the next bolt. You want to tighten it evenly so you don’t warp the pressure plate.
44883, RE: Non-Modular Install Help..... Fast Please!
Posted by juggalo, Feb-20-03 01:22 AM
>8M 1.25 I think...I don't know the length though, I just got
>them from the dealer.
>

8M 1.25 X 17
44891, RE: Non-Modular Install Help..... Fast Please!
Posted by Michael_97RS, Feb-20-03 03:28 AM
If you buy these from a parts store and pull out of the bulk bin. PLEASE make sure you get hardened bolt, grade 10.9. Easiest is to call dealers in the area and see if anybody has them in stock.



15.9 @ 86.7mph
97 Eclipse RS

Injen CAI, 55mm TB, P&P Intake, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC