How do you hang it???

I am using a gutted cat with a pipe insert right now so it was easy to hange because it fits just like a stock cat but if I were to use a real test pipe or high flow cat, how in the hell do you hang it?? I suppose you can have hangers welded on but is there another way??

Pictures would be REALLY helpful but I wll take just a description if you can enlighten me.

TIA

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

My testpipe is pretty light, so hangers weren't necessary. It's held firmly in place by the 2 large bolts on each end.

You are not your job.
You're not how much money you have in the bank.
You're not the car you drive.
You're not the contents of your wallet.
You're not your fu**ing post count.

97 Eclipse GS - *SOLD*
01 Audi A6 2.7T
01 YZF-R6

same here

99GSX Auto 14b@17psi 13.345@102mph

Same here for my testpipe too, just used the 2 bolts on each end to support it, no need to use for hangers.

Kris
"Someday............I'll have traction problems!!!!"
Tampa, FL
Pinoy Turbo 2GNT

1999 HRC Turbo RS
Stage 2
Auto with BOOST!!!!!!!!!!!!

I had the stock hangers cut off my stock cat and welded onto the new high flow cat by a VERY good welder (my friends always call him "Dave the welder"). this worked out very well, but only if you've got someone who is good at it.

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

Well my testpipe is custom and it is welded on which sucks cause if I have to get a new exhaust system I will have to order from my downpipe and on down to the exhaust .



99 GS OZ EDITION
MODS-
Hahns Stage 2 Turbo Kit
Apexi N1 Catback
Testpipe
Progress Sport Springs
Audio- Sony LCD entertainment stereo
Pioneer XM Radio
2 Alpine type R 12s
MTX-775 Watt Amp

Future Mods-
17in Rims
JSP Carbon Fiber Blade or Arospeed Carbo

I thought about just bolting it inplace but when I installed my header I gave up the downpipe supportso besides the engine block connection to my header the first support would be the cat. I would hate to have any more strain on my header/block connection.

So does a high floe cat still have a catalyst in it??

I emailed the guy selling one on ebay and his is just a resonator with no catalyst...I thought they still did something...

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims