ok, im wondering what timing belt do i use 2.0 or 2.4. I also wondered since the head is the other way around do i turn the exhaust cam half a tooth below the intake cam mark, or do i reverse it since the cams are reversed? thanx for the help.
#41703, "RE: putting timing belt on 2.4 ?" In response to Reply # 0
list what motor your working on and the specs and ill give u some help,
2.0 belt for 2.0 motor 2.4 belt for 2.4 motor
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#41810, "RE: putting timing belt on 2.4 ?" In response to Reply # 2
u need to fli the gears around backwards if u are not usging aftermarkt 2.4gears also....
2.0 gears on 2.0 head flipped
u could use the 2.4 gears i suppose i havent heard of that yet..
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#41844, "RE: putting timing belt on 2.4 ?" In response to Reply # 3
The 2.0 and 2.4 gears are exactly the same. You put them on one way for the 2.0 and flip them over for the 2.4 (they are marked for both). Anyway that is not the problem. He is having a hard time figuring out how the tensioner is supposed to work. After we figure that out the motor is ready to go back in the car. Any help is appreciated.
that should answer your questions also read that site good so nothing gets broken make sure u put in all the water pump bolts !!!!
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#41899, "RE: putting timing belt on 2.4 ?" In response to Reply # 8
I have seen the page from bob stockum but that tensioner set-up is different. We just wanted to use the sock tensioner. It is just a pullet that bolts to the block. It dosent have the plunger thing like the 2.0. I think it is a solid tensioner but i am not shure. We have a chiltons manual but it dosent show this tensioner either. Aparenty it was redesigned by chrysler so we had to trim the covers for it to fit now we just have to figure out how it works.
#41936, "RE: putting timing belt on 2.4 ?" In response to Reply # 9
I forgot which belt tensioner, but I think it was the pt crusier one, he went to the dealership and ordered a new one, and it's spring pressed or spring something
#41949, "RE: putting timing belt on 2.4 ?" In response to Reply # 10
can u post pics with the part nuber and me and neons.org will figure out which tensioner u have =P
ive heard chrysler redesigned th tensioner none has pics though
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
Search
Printer-friendly copy
0 Users in Chat
