| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | putting timing belt on 2.4 ? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=41702 |
41702, putting timing belt on 2.4 ?
Posted by onebaddsm98, Jan-14-03 08:54 AM
ok, im wondering what timing belt do i use 2.0 or 2.4. I also wondered since the head is the other way around do i turn the exhaust cam half a tooth below the intake cam mark, or do i reverse it since the cams are reversed? thanx for the help.
|
41703, RE: putting timing belt on 2.4 ?
Posted by MotoFool, Jan-14-03 02:21 PM
list what motor your working on and the specs and ill give u some help,
2.0 belt for 2.0 motor 2.4 belt for 2.4 motor
|
41704, RE: putting timing belt on 2.4 ?
Posted by RIeclipse, Jan-14-03 08:48 PM
you will use the 2.4 belt with the 2.4 block but you will need to take the cam gears off the 2.4 head and put the cam gears on the 2.0 head.
|
41810, RE: putting timing belt on 2.4 ?
Posted by MotoFool, Jan-16-03 09:02 AM
u need to fli the gears around backwards if u are not usging aftermarkt 2.4gears also....
2.0 gears on 2.0 head flipped
u could use the 2.4 gears i suppose i havent heard of that yet..
|
41844, RE: putting timing belt on 2.4 ?
Posted by mike_d, Jan-16-03 05:14 PM
The 2.0 and 2.4 gears are exactly the same. You put them on one way for the 2.0 and flip them over for the 2.4 (they are marked for both). Anyway that is not the problem. He is having a hard time figuring out how the tensioner is supposed to work. After we figure that out the motor is ready to go back in the car. Any help is appreciated.
|
41864, RE: putting timing belt on 2.4 ?
Posted by MotoFool, Jan-16-03 07:10 PM
pulley attaches to the tensioner ill grabapic here
http://www.bstockum.com/tensionerpage2.html
that should answer your questions also read that site good so nothing gets broken make sure u put in all the water pump bolts !!!!
|
41873, RE: putting timing belt on 2.4 ?
Posted by RIeclipse, Jan-16-03 09:54 PM
you will use the 2.4 belt with the 2.4 block but you will need to take the cam gears off the 2.4 head and put the cam gears on the 2.0 head.
|
41874, RE: putting timing belt on 2.4 ?
Posted by RIeclipse, Jan-16-03 09:55 PM
well you ask, how do I know this, well I'm helping bill with his 2.4L swap and he couldn't use his 2.0 aem cam gears
|
41898, RE: putting timing belt on 2.4 ?
Posted by mike_d, Jan-17-03 06:12 AM
I dont know about the AEM gears but the stock gears are the same.
|
41899, RE: putting timing belt on 2.4 ?
Posted by mike_d, Jan-17-03 06:19 AM
I have seen the page from bob stockum but that tensioner set-up is different. We just wanted to use the sock tensioner. It is just a pullet that bolts to the block. It dosent have the plunger thing like the 2.0. I think it is a solid tensioner but i am not shure. We have a chiltons manual but it dosent show this tensioner either. Aparenty it was redesigned by chrysler so we had to trim the covers for it to fit now we just have to figure out how it works.
|
41936, RE: putting timing belt on 2.4 ?
Posted by RIeclipse, Jan-17-03 12:53 PM
I forgot which belt tensioner, but I think it was the pt crusier one, he went to the dealership and ordered a new one, and it's spring pressed or spring something
|
41949, RE: putting timing belt on 2.4 ?
Posted by MotoFool, Jan-17-03 02:20 PM
can u post pics with the part nuber and me and neons.org will figure out which tensioner u have =P
ive heard chrysler redesigned th tensioner none has pics though
|