Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Performance/Engine topic #41521
View in linear mode

Subject: "egr hose" Previous topic | Next topic
HRTJan-12-03 10:58 AM
Member since Jan 12th 2003
15 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41521, "egr hose"


          

sorry to post another "EGR" question, but the other day my check engine light came on.. I didnt think much of it I just figured that the ECU finally figured out that the guts of my catalytic conv. were missing. I just changed my oil and inspected the engine bay and saw that the little hose coming off the top of the EGR valve had busted/come off... Will this do any damage (other than the annoying CEL)??

See it at http://www.geocities.com/twobfaster/
97 RS....Dodge Viper Yellow Paint, GS side skirts, Aerospeed dual black spoiler, Battle Z FE, Team Loco 134 17" rims, Sumitomo HTRZ rubbers, gutted cat, magnecor wires, Iceman CAI,Mozart Muffler,Hurricane GS

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: egr hose, juggalo, Jan-12-03 11:15 AM, #1
RE: egr hose, HRT, Jan-12-03 11:23 AM, #2
      RE: egr hose, juggalo, Jan-12-03 04:29 PM, #3
      RE: egr hose, MotoFool, Jan-12-03 06:51 PM, #4
           RE: egr hose, juggalo, Jan-12-03 08:25 PM, #5
           RE: egr hose, TeamMichael_97RS, Jan-13-03 01:09 AM, #6
                RE: egr hose, Teamdougie2, Jan-13-03 02:12 AM, #7
      RE: egr hose, HRT, Jan-13-03 11:08 AM, #8
           RE: egr hose, juggalo, Jan-13-03 05:05 PM, #9
                RE: egr hose, MotoFool, Jan-14-03 04:06 AM, #10
                     RE: egr hose, a_miller_76, Jan-14-03 05:29 AM, #11

juggaloJan-12-03 11:15 AM
Donating 2GNT member
2945 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41522, "RE: egr hose"
In response to Reply # 0




          

>sorry to post another "EGR" question, but the other day my
>check engine light came on.. I didnt think much of it I just
>figured that the ECU finally figured out that the guts of my
>catalytic conv. were missing. I just changed my oil and
>inspected the engine bay and saw that the little hose coming
>off the top of the EGR valve had busted/come off... Will
>this do any damage (other than the annoying CEL)??

it connects to the intake manifold so if its broke or disconnected you will have a vacuum leak and your EGR valve can't open.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
HRTJan-12-03 11:23 AM
Member since Jan 12th 2003
15 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41523, "RE: egr hose"
In response to Reply # 1


          

thanks but is that good or bad.... The car does seem to have a little more pep in the last couple of days.. Not that that is the reason, its probably because its been about 15-25 degrees with no snow(I park it during the winter) and Im not used to its performance with in the cold.

See it at http://www.geocities.com/twobfaster/
97 RS....Dodge Viper Yellow Paint, GS side skirts, Aerospeed dual black spoiler, Battle Z FE, Team Loco 134 17" rims, Sumitomo HTRZ rubbers, gutted cat, magnecor wires, Iceman CAI,Mozart Muffler,Hurricane GS

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
juggaloJan-12-03 04:29 PM
Donating 2GNT member
2945 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41524, "RE: egr hose"
In response to Reply # 2




          

yup the cold air will give it alot more 'pep'. how has the idle been on it? usually when there is a vac. leak your car will have an unstable idle. which would be bad.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
MotoFoolJan-12-03 06:51 PM
Member since Sep 08th 2002
2103 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41525, "RE: egr hose"
In response to Reply # 3


          

ive beent rying to research the egr resitor mods that ive seen on the neon boards and wondering if anyone has done them ona 2gnt with sucess?

we can use the egr plates froma neon right?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
juggaloJan-12-03 08:25 PM
Donating 2GNT member
2945 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41526, "RE: egr hose"
In response to Reply # 4




          

this is how i have mine set up. it keeps my cel from coming on except when i drive around for a long long time with the pedal floored. and the reason it does then is because my car doesn't have a steady idle when its hot so it sticks at higher rpms when the car is checking the EGR system.

The detect operation of the system, the solenoid
is disabled and the 02 compensation control is monitored.
If the EGR system is operating properly, turning it
off shifts the air/fuel ratio in the lean direction.
02 sensor data should indicate an increase in oxygen
in the exhaust gases and cause the short term
control to shift rich. The amount of the shift indirectly
monitors the operation of the system.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
TeamMichael_97RSJan-13-03 01:09 AM
Donating 2GNT member
5866 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41527, "RE: egr hose"
In response to Reply # 4


          

Yes you can use the Mopar EGR block off kit, same for the Neons. The vacuum leak is bad at least cap it off so there isn't a leak.

I threw a resistor in mine, but I have no idea if it helped (since I took out the CEL bulb) I need to plug her into an ODB-II and see.

1997 Eclipse RS (in winter slumber for head gasket repair and other projects)

He who knows men is clever; He who knows himself has insight.
He who conquers men has force; He who conquers himself is truly strong.
-Lao Tzu

Injen CAI, AFX 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, Apexi S-AFC

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
Teamdougie2Jan-13-03 02:12 AM
Old School 2GNTer
2982 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41528, "RE: egr hose"
In response to Reply # 6




          

Michael- what size resistor did you use and where did you put it?



Doug

Xtreme Performance Services

Race Engines 路 Transmissions 路 Turbo Systems 路 EFI & Tuning 路 Fabrication 路 Welding
www.xtremefabrications.com

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
HRTJan-13-03 11:08 AM
Member since Jan 12th 2003
15 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41529, "RE: egr hose"
In response to Reply # 2


          

I guess the idle has been just fine... I mean I havent noticed any difference... yeah cold air gives it way more pep, b/c if I mash the throttle after the engines warmed up it will spin the tires a bit towards my shift point and then I get a nice good second gear scratch. So as long as the idles fine I dont have any major threat as of yet... Ill fix it later because it finally started snowing here so itll be parked until spring, I have other things to fix now(blown shock in the back right) stupid auto-x.......

See it at http://www.geocities.com/twobfaster/
97 RS....Dodge Viper Yellow Paint, GS side skirts, Aerospeed dual black spoiler, Battle Z FE, Team Loco 134 17" rims, Sumitomo HTRZ rubbers, gutted cat, magnecor wires, Iceman CAI,Mozart Muffler,Hurricane GS

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
juggaloJan-13-03 05:05 PM
Donating 2GNT member
2945 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41530, "RE: egr hose"
In response to Reply # 8




          

if its gonna be parked for the winter make sure and put some fuel stabilizer in.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
MotoFoolJan-14-03 04:06 AM
Member since Sep 08th 2002
2103 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41531, "RE: egr hose"
In response to Reply # 9


          

bump resitor size and whos done the jsut block off the vacume line adn then the egr doesn't function do u have a CEL

whos done the resistor mod do u have a CEL?

who just un plugged their CEL light?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
a_miller_76Jan-14-03 05:29 AM
Donating 2GNT member
9515 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#41532, "RE: egr hose"
In response to Reply # 10




          

I have a CEL.

Everything plugged in and bolted on, just a block off plate in there for no flow.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #41521 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.08 seconds, executing 36 queries.