I am eventually going to get an HRC stage 2 kit w/ FMIC and later on upgrade to a stage 3 w/ built internals. My questions it this...its going to take me a while to save up for the stage 2, but i want a some more power right now to tide me over. My power addiction has grown =)
Should i get headers and/or exhaust and/or UDP or just stay with only my intake? Will i have to replace a UDP when i get the kit? I have heard you dont have to replace it. I dont mind spending some for the parts now even if i cant use them b/c i can always sell them later.

What should i do?

David
MrClean125 on AOL/AIM

"It is better to have died in the ranks of the vanquished warriors than to dwell in the grey twilight of those who never tried..." -Teddy Roosevelt

-NGK plugs and Wires
-AEM CAI
-V-Racing UF Strut Bar
-Skunk2 coilovers
more to come....

Dave "The Bald Bull"
97 RS Member of the infamous Barcelona Red Crew

"Free people will never remain free, if they are not willing, if need be, to fight for their vital interests"

"It is better to have died in the ranks of the vanquished warriors th

Get the exhaust, and udp - they both can stay there - just make sure you get the turbo version of the exhaust (GST) - the underdrive pulley has nothing to do with the kit. Headers will have to be removed. Good luck.

2003 VW GTI 1.8t.. I used to have a 95 Eclipse but well...water sucks.

If you know you are going turbo don't get anything you will be replacing. So no don't do the headers, you will already have to get rid of your intake so no need to have more spare parts. I would go UDP which you won't mess with. Also do something for exhaust. Simplest being GS-T muffler. But if you really want to prep for the turbo, go with a nice 3" cat-back (downside is that you will loose some bottom end with this until you turbo). You can get the AFX 55mm throttle body, also you can get your intake manifold ported and polished, both will help your airflow turbo'd.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., S-AFC, EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished, A/F Meter

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.