Would anyone know the thread size of the fitting on the hard line that you connect the softline from the pump assembly?


14mm x 1.5?
10mm x 1.5?
16mm x 1.5?





___________________________
l e o n
1995 Eagle Talon ESi-T
Star Stage 2
Boost is GOOOOOOOD!

it's a 14mm x 1.5 inverted flare 45° SAE, but good luck finding a fitting to mate with it. i searched every auto and hydraulic hose shop in the tri-state area and couldn't find one. i ended up taking the stock hose and grinding the compression collar off the fitting and pulling the hose off. then just use that as a hose barb fitting and clamp your new hose onto it. a -6 AN hose will fit on the barb nicely. then you can use a regular an fitting on the other end to mate with whatever you're doing over there.

BTW - if you DO find a fitting that mates with the OEM, let me know where i can get one.

Reviving an old thread rather than post more useless crap haha. Has ANYONE ever found the ACTUAL correct fittings anywhere? Its a never-ending quest lol. Someone has to make 'em.

Jamie-
-AUTOMATIC turbo'd 95 Talon ESI@8psi (stock internals)14.0sec=1/4 mile

-2003 Mitsubishi Evo VIII

I made a female collar to run onto the fitting that would allow you to insert a 6an male union. THe two would join forming a seal.

There was word you could get such fitting but i never saw one.

Terry