Just got them in the mail, didnt realize they were for the manual transmission only. :/

i thought i read on ASOG that the front mount is the same regardless of which tranny, just the rear mount is different - is that true?

does energy make a poly engine mount kit for the atx?

edit--just to be sure, anyone know of hand what the correct part # is for us for the energu mounts, want to be sure i didnt get a 4g63 set

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

http://www.energysuspension.com/mit.html

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

>http://www.energysuspension.com/mit.html


so the fwd 4g63 guys use the same mounts? i only saw a listing for 95-99 fwd and 95-99 awd, no turbo/non-turbo listing

im also assuming by that, that there are no atx kits.

so what are the atx guys doing for the rear mount?

edit--
lookin @ that site again, it lists "5.1103 (113)" what is the 113 in paranthesis mean?

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

i would assume that the 5.1103 (113) would be 5.1103, 5.1113

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

I can't remember the part number for mine, but it WAS for a 5-speed. It fitted with no probs.

Kris
"Someday............I'll have traction problems!!!!"
Tampa, FL
Pinoy Turbo 2GNT

1999 HRC Turbo RS
Stage 2
Auto with BOOST!!!!!!!!!!!!

>i would assume that the 5.1103 (113) would be 5.1103, 5.1113


i would assume the same thing, but the question is, what is 5.1113
i have 5.1103 and includes front and rear mounts. is 5.1113 the atx set maybe?


robotech - the one i got says for the manual only....i have an atx. ive been told the rear mounts are different. true?

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

>>i would assume that the 5.1103 (113) would be 5.1103, 5.1113
>
>
>i would assume the same thing, but the question is, what is
>5.1113
>i have 5.1103 and includes front and rear mounts. is 5.1113
>the atx set maybe?
>
>
>robotech - the one i got says for the manual only....i have
>an atx. ive been told the rear mounts are different. true?

Mine said MT too in a sticker on the back. I had my friend who installed them for me, works at a local Dodge dealer, when I had my power steering serviced. He said the back was a little tough to get to, but it did fit. Again, that's what he told me. I'm not sure if they changed the design of the mounts recently or whatever, I got mine from overboost.com by the way. Oh yeah, I'm AT too!!!!

Kris
"Someday............I'll have traction problems!!!!"
Tampa, FL
Pinoy Turbo 2GNT

1999 HRC Turbo RS
Stage 2
Auto with BOOST!!!!!!!!!!!!

>Mine said MT too in a sticker on the back. I had my friend
>who installed them for me, works at a local Dodge dealer,
>when I had my power steering serviced. He said the back was
>a little tough to get to, but it did fit. Again, that's what
>he told me. I'm not sure if they changed the design of the
>mounts recently or whatever, I got mine from overboost.com
>by the way. Oh yeah, I'm AT too!!!!


oh yea, duh, sorry i forgot you have an atx also, heh, sorry bout that, thanks for the reply

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

i just looked it up, the (113) is a foot note that means (With manual transmission)

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

>i just looked it up, the (113) is a foot note that means
>(With manual transmission)


wtf...i have part # 5.1103R, says "Application include: 1995-99 eclipse, spyder, talon. This set fits torque mount positions only and manual transmissions only."

maybe the 113 is the 4g63 inserts?

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

remember, just cause the mount is different, does not mean that the actual rubber part where you are putting the insert is different. it could just be that the brakets are different the where each side of the mount connects to eachother (the rubber part) could be exactly the same, and probably is.

i used the 4g63 prothane mounts perfect fitament got them straight from rre

about twice as rigid or hard as the energy mounts,

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.