is this actually a 56mm bore or just a 55mm bore like the one you can get from howell ???

http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTAFXDSTB95S&MakeCode=mitsub&ModelCode=eclips&ModelYear=1995%2D1999%20All%20Non%2DTurbo%20Models&ModelDesc=Eclipse



Talon
97'Talon Esi
AEM cam gears
Injen short ram intake
Rear-upper strut bar

would have more mods but just a poor kid! LOL

anyone know?????

Talon
97'Talon Esi
AEM cam gears
Injen short ram intake
Rear-upper strut bar

would have more mods but just a poor kid! LOL

Same 55mm from Howell. I think it's just a difference in measuring.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., S-AFC, EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished, A/F Meter

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Anyone know from experience if this 56mm bored TB makes a noticable power boost over the stock TB.

97 RS in Union City CA
Mods: Injen Intake, Greddy Evo Can, 1.3" drop

join #2GNT on Dalnet IRC

"Liberate Tutemea Ex Infernis"
More pics at www.cyn0sure.homestead.com

yeah ask Michael he says a diff...you can notice. think about it more airflow in = more power. i should have mine in 2 weeks. i am gonna sell my stock one.

Talon
97'Talon Esi
AEM cam gears
Injen short ram intake
Rear-upper strut bar

would have more mods but just a poor kid! LOL

Yeah I noticed the difference, and you can hear the motor just sucking the air in. Definately worth the $150 I paid for it. ($50 used TB, $100 Howell porting)

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., S-AFC, EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished, A/F Meter

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

in the voice of Mr. Burns .... Agreed! Of course you should have a after market intake too.


-Avenger
99 Eclipse RS
AEM CAI w/ bypass valve, Tanabe Hyper Medallion cat-back exhaust, Unorthodox UDP, Magnecore 8.5mm Plug wires, 55mm bored TB, S-AFC, Eibach Sportline Springs, Ingalls Front and Rear Camber Kit, Enkie Shogun 17" wheels w/ 215/40/17 BFGoodRich Scorchers (yellow), Flashy A/F gauge

Sitting around: Intake manifold for porting

On the way: OBX Cam Gears, Digital A/F guage

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

Well thats good enough for me, Im sold!

97 RS in Union City CA
Mods: Injen Intake, Greddy Evo Can, 1.3" drop

join #2GNT on Dalnet IRC

"Liberate Tutemea Ex Infernis"
More pics at www.cyn0sure.homestead.com

So is it hard to install it say if I were to buy that whole new unit from ptunning? and is there hp rating that they give accurate?

Two bolts and a couple of torx head screws. Easy as long as you have a set of torx head screw drivers. I do suggest getting a new TB gasket for the install, only a few bucks at SATAN. Also do the Throttle plate adjustment when you are done.

What HP rating do they have?

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., S-AFC, EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished, A/F Meter

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Well they said about 4-6 hp. They about right?

Intall is easy but getting the sensors off your old TB and put on your new TB might be hard. I had to take mine to the mitsu dealer to have them removed. They used an impact driver. They did it for free just had a make a trip down there.

That was the hardest part.


-Avenger
99 Eclipse RS
AEM CAI w/ bypass valve, Tanabe Hyper Medallion cat-back exhaust, Unorthodox UDP, Magnecore 8.5mm Plug wires, 55mm bored TB, S-AFC, Eibach Sportline Springs, Ingalls Front and Rear Camber Kit, Enkie Shogun 17" wheels w/ 215/40/17 BFGoodRich Scorchers (yellow), Flashy A/F gauge

Sitting around: Intake manifold for porting

On the way: OBX Cam Gears, Digital A/F guage

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

hey Mike, you said its only $150 for the tb? how come ptuning is charging $279? I want one too for 150 then I could port the manifold to match it..

Thura you whoos, can't you turn a torx screwdriver . I actually did the install on a lunch hour. Ran home and did it.

The $279 is a price for a new TB. I picked up a used Throttle body for $50. Then sent it to Howell to do the porting for $100. If you find yourself a used TB somewhere and send it to Howell/AFX you will be okay.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

i you buy a used throttle body which one do you want to get? 1st gen or 2ndgen? which one is bigger?

that 1st gen tb is a 4g63 thing as i remember one knowlegable person telling me on this board when i first became a member. get a used 2g t/b and have it bored i am getting a new one for hassle reasons. also i like new otherthan used for some reason.

Talon
97'Talon Esi
AEM cam gears
Injen short ram intake
Rear-upper strut bar

would have more mods but just a poor kid! LOL

yeah i bought one from stan and was gonna have it bored but its ugly as fuck so im gonna swap it with mine, send mine to get bored, and swap them again. if any one wants to buy that ugly thing off of me when its all done let me know you could do the same thing. we could all play pass the throttle body!!!! yay!!!

aem cai
pacesetter headers
gs-t exhaust
red altezzas
rims, tires, and a bunch of other little stuff....that list is way too short....more will come!

-jason

hey js, slick idea....I'm up for it. so how much will it be?

its probably not gonna be till the end of the summer so watch for a post. it will be $60 shipped.

aem cai
pacesetter headers
gs-t exhaust
red altezzas
rims, tires, and a bunch of other little stuff....that list is way too short....more will come!

-jason