#40610, "RE: throttle body cord" In response to Reply # 0
on your throttle body there s hould be a couple bolts that hold a slider down that is connected to your throttle cable, but i'm not sure if this is what your asking. if you move this piece of metal you can tighten it up a little, but you are adjusting your butterfly valve too.
Having Problems? Heres my Three step solution to anything 2gnt related. Step 1: Put down everything in your hands. Step 2: Grab a lucky strike, Smoke it. Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you. If not. Go here: here
If still nothing, your trying to hard. Start over at step 1.
#40612, "RE: throttle body cord" In response to Reply # 2
If these two bolts dont tighten it enough (as mine when I modded the TB) there is a black box lookin thing it comes out of on the passenger side of the engine bay. You loosen the front bolt and slide it off then loosen the back or tighten it, whichever goes the desired direction. Annoying work though because you have to fully put it back on in order to see if its tight enough then repeat that over and over. O well it worked
Search
Printer-friendly copy
3 Users in Chat
snapped one of the bolts by over torqueing it.....still need to fix that