I searched the forum, and the internet, and I couldn't find any kind of review on the Borla Pro XS muffler. I know they're stainless, and Borla is a really good brand, but have any of you heard anything about them or does anybody have one? They're only about $85 which is not bad compared to the non-name brand ones.

<http://www.borla.com/proxs/?cartID=2002121407493668.63.69.168>

Thanks
Heather

95 RS, AFX Underdrive Pulley, Front and Rear Strut Tower Braces, Front Lower tie bar, OBX Header, Final Drive Mod, Konig Traffic rims with Kumho Ecsta Supra Tires, Accel Spark Plug Wires, Dynomax Exhaust, Optima red top Battery, Air Intake, Z3 Fenders (T

well.. it's a univeral design that isn't meant to be on teh end of the system, it's meant more to be in the middle of the exhaust system and not seen from the outside. but other then that.. if it'll fit in the space where your muffler goes.. it should be fun. but I'm thinking it won't fit. have to do some measuring.

I think they are supposed to go on the end, because they sell tips for them on that same site. I've never used a borla muffler, but a 1 million mile warranty on an $85 stainless muffler sounds like a good deal to me. It is a good brand name for exhaust.


ride__________95 Eclipse RS : 5 speed
power________Field SFC Hyper-R : Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback
suspention___Hurricane F/R lower strut ties : BOMZ F/R upper strut bars : ES inserts
sound________Kenwood KDC 5000 : Audiovox 8" sub toob - no sub amp(damnit!)
shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear)
incomming___Bosal header
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

looks like a "turbo" muffler. the muffs they put on the older cars and V8's that have the muffs in the center of the car than run pipe out the back and weld a tip on to make it pretty. not sure if it'll work on our car given the OE muffler placement.

http://www.ocaddict.com

thanks beefgg for the sig

you could do that (what ^^^^ said) but I would probably get the muff and then just get the tip welded on one end and then welded the other on the piping where the stock muff is at. I personally would just get a muff with a tip on it already. My obx muff was like ninety something shipped and it has the tip etc on it. It is a great muff with excellent sound quality

Toney
'97 RS 5 Speed (totaled)
15.4606@88.42 Mph
96 Toyota Celica GT
88 Toyota Supra NA-T (w/ sports package)
Got Boost?? Hell yeah I-6 turbo powah baby!