Gonna do this on the new tranny, so the shit doesnt happen again. anything i need to be careful with or is it pretty straight forward and easy?
www.TeamKLR.com 1997 Silver RS 12.3@118mph,20psi, race gas(drag radials) Wiseco 10.5 Pistons Eagle Rods Started as a manufactured turbo kit, now its a custom one! Vortech FMU Greddy Exhaust 440cc Injectors
Waiting on the EVOlution!
1997 Silver RS Built T3/T4 BB Turbo 20psi Most current 1/8th mile time: 8.1@93mph 2.015 60' 1996 Black Supra TT 2004 Silver Snake
#39515, "RE: Who has welded the diff pin?" In response to Reply # 0
You may want to hold it in with some brackets instead of welding it. Brackets make life much easier if you want to work on the diff again - like for instance installing a PG, or changing PG springs. Here's a PG install link that talks about welding the pin - it also shows and talks about the brackets - http://www.scecnet.net/~neonneon/neon/gripinstall.html
ride__________95 Eclipse RS : 5 speed power________Field SFC Hyper-R : Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback suspention___Hurricane F/R lower strut ties : BOMZ F/R upper strut bars : ES inserts sound________Kenwood KDC 5000 : Audiovox 8" sub toob - no sub amp(damnit!) shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear) incomming___Bosal header Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html
#39516, "RE: Who has welded the diff pin?" In response to Reply # 1
i welded the pin. I actually had someone do it for me, i don't weld. It was straight forward. But if i would have known about the brackets i would have gone that route.
http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions 95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD 93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD 2006 Scion tC
#39517, "RE: Who has welded the diff pin?" In response to Reply # 2
pinb rackets 4.20$ each u need too no welding anymore dude
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#39518, "RE: Who has welded the diff pin?" In response to Reply # 3
So where can i get these pin brackets?
www.TeamKLR.com 1997 Silver RS 12.3@118mph,20psi, race gas(drag radials) Wiseco 10.5 Pistons Eagle Rods Started as a manufactured turbo kit, now its a custom one! Vortech FMU Greddy Exhaust 440cc Injectors
Waiting on the EVOlution!
1997 Silver RS Built T3/T4 BB Turbo 20psi Most current 1/8th mile time: 8.1@93mph 2.015 60' 1996 Black Supra TT 2004 Silver Snake
#39521, "RE: Who has welded the diff pin?" In response to Reply # 6
I have always had trepedations about welding the diff pin. If you are doing a burnout, and the pin thermally expands to "weld" itself to a spider gear, then I think that the pin would have a high chance of breaking anyways, but it would happen somewhere inside of the weld. this could still liberate a spider gear or 2 which would ruin a transmission. -=B-=
Dude, Boeing called. They want their wing back.
Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate. Me: Can I put that in my sig? Dark0ne95: GO right fucking ahead.
#39522, "RE: Who has welded the diff pin?" In response to Reply # 7
I welded mine as well, but I'd get the brackets if I was you....just in case for some reson you need to take apart your differential. What ever happened to your tranny anyways???
#39523, "RE: Who has welded the diff pin?" In response to Reply # 8
The pin backed out of the tranny.... im just replacing the whole thing. do i just need one bracket? thanks guys.
www.TeamKLR.com 1997 Silver RS 12.3@118mph,20psi, race gas(drag radials) Wiseco 10.5 Pistons Eagle Rods Started as a manufactured turbo kit, now its a custom one! Vortech FMU Greddy Exhaust 440cc Injectors
Waiting on the EVOlution!
1997 Silver RS Built T3/T4 BB Turbo 20psi Most current 1/8th mile time: 8.1@93mph 2.015 60' 1996 Black Supra TT 2004 Silver Snake
#39524, "RE: Who has welded the diff pin?" In response to Reply # 9
i would assume you would need two brackets. one for either side
http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions 95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD 93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD 2006 Scion tC
#39526, "RE: Who has welded the diff pin?" In response to Reply # 9
>The pin backed out of the tranny.... im just replacing the >whole thing....
Damn, I thought that's what happened. Well, if nothing(or not much) was damaged then it wouldn't be a total loss. I'm sure you could sell it to some AT guy who want to swap in a MT. This friggin pin problem is too common for our cars. I wish I had some performance oriented reason to drop the tranny so I can bracket the little bastard in...maybe Santa will get me a PG this Christmas.
ride__________95 Eclipse RS : 5 speed power________Field SFC Hyper-R : Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback suspention___Hurricane F/R lower strut ties : BOMZ F/R upper strut bars : ES inserts sound________Kenwood KDC 5000 : Audiovox 8" sub toob - no sub amp(damnit!) shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear) incomming___Bosal header Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html
#39527, "RE: Who has welded the diff pin?" In response to Reply # 12
Above it was mentioned they needed to be trimmed a little to fit... any idea how much? im new to this messing-with-tranny shit, i live sticking to engines a lot better..
www.TeamKLR.com 1997 Silver RS 12.3@118mph,20psi, race gas(drag radials) Wiseco 10.5 Pistons Eagle Rods Started as a manufactured turbo kit, now its a custom one! Vortech FMU Greddy Exhaust 440cc Injectors
Waiting on the EVOlution!
1997 Silver RS Built T3/T4 BB Turbo 20psi Most current 1/8th mile time: 8.1@93mph 2.015 60' 1996 Black Supra TT 2004 Silver Snake
Search
Printer-friendly copy
2 Users in Chat
