So I dropped my car off at satan yesterday to get a 4-wheel alignment and the dealer calls at 3 telling me I have a blown head gasket. He says the car has a 6 year/60,000 mile power train warranty so he'll do it for nothing b/c my car only has 36,000. I did a search here and found 70+ topics for head gaskets but nobody is really talking miles. So what's the deal ... anybody else blow at head gasket at such low miles and what the heck happened??



In order:
Mirror Tint|Grillcraft grill|SprilMax|GST Exhaust|Front/Rear strut bars|EBC brakes|Brembo Crossdrill/slotted rotors|AEM CAI|NGK Plugs|Magnecor Wires|Konig VeloCT 17x7|Niitto 450's|55mmTB|

Next:Custom Short Shifter

1999 Eclipse GST 4G63

Welcome to the world of our funked up headgaskets, mine was diagnosed as blown at 30k miles but im at 70k now with no visable leaks etc..

But they didnt offer to pay for it when I took it in so by all means get it done now for free

My GF neon (same engine, headgasket etc..) as been through 3 in under 50k miles, first one was bad at 30k then they didnt flatten the head and it happened again at 40K, they I got them to pay for it again with a 200 deductable at 50k cause it was leaking again, now shes at like 65k miles and no problems yet cause they finally put the MLS gasket on

Get it done for free, this is a SUPER COMMON problem with our cars esp. 95-97 98 and up SHOULD have the MLS gasket depending on when it was made in the 97-98 year

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

my original head gasket had 101,000 miles on it.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

In my old 97 RS the head gasket blew out with less than 30k on it. They sure as hell didn't replace it for free for me...

Mine just went with under 60,000 Miles (I got 90,000 KMS) - Looks like mine lasted awhile comapred to some of you!

-----------------
1997 Eagle Talon ESi
Check out more pictures here: http://mikelaidlaw.tripod.com



MODS
-----
Blitz Front Bumper - Invader Type 1 Side Skirts - 17" Gunmetal Motegi MR7's - Final Drive Gear Mod - H&R Lowering Springs - 97 Eclipse Headlights - Taillight Mods - Interior Colouring/Lighting/Accessories - Stereo - Intake Filter, Plugs and Wires

Just make sure they use the MLS gasket...

I edited to the wiki!

Where can i pick up an MLS one....
I have 54000 on my car now, i went turbo at 30000 give or take, and I just blew mine.

-Danny


" We cannot appeal to the conscience of the world when our own conscience is asleep. " Carl von Ossiet

call the dealer

I edited to the wiki!

My Neons was done under 60k. And my Eclipse just blew at under 40k.\

It just happens to ours, the stock HG isn't the best. The new MLS gasket is much better.

Una salus victus.
"Be like the cliff against which the waves continually break, it stands firm and tames the fury of the water around it" - Marcus Aurelius

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines, AFX 55mm TB (re-installed once exhaust is done, intake was outflowing exhaust)

To be fixed?: Head gasket... unless coolant reservoir is suppose to bubble, hmmmm.

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Don't forget the top driver's side bolt was too long (actually it's hole was too shallow) from 95-98 and some 99's... if your HG blew on the back of the motor, grind off a little of that head bolt. Search the archives for more info.

ALSO!!!! There are *3* MLS head gaskets for our motor. Get the nice new 4-layer charcoal colored one and use the TSB and service manual specified Mopar Gasket Dressing spraycan stuff. I haven't heard of one of the new ones blowing yet...

See here for more info!
http://www.fwdmopar.com/sites/dennis/2.4RTpics4.html

Well I am crossing my fingers, I have a 99 with 37,000 miles on it. I check it regularly for leaks because I am not exactly easy on my car.

just in case somebody doesn't know what MLS is.
MLS=Multi-Layer Steel

what brand has everyone been using?

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

Thanks^^^ ... I was just about to ask that question. Since the dealer *offered* to do mine what are the chances they are using the MLS gasket vs. the stock? I will call on Friday and see what they used - is the "new" MLS a mitsu part or an aftermarket thing? I'll let you guys know what they did. Thanks for the input.



In order:
Mirror Tint|Grillcraft grill|SprilMax|GST Exhaust|Front/Rear strut bars|EBC brakes|Brembo Crossdrill/slotted rotors|AEM CAI|NGK Plugs|Magnecor Wires|Konig VeloCT 17x7|Niitto 450's|55mmTB|

Next:Custom Short Shifter

1999 Eclipse GST 4G63

They have too....they are the ones who are making it...there are no other head gaskets from mitsu or dodge/chrystler. Unfortunatally for us dodge no longer sells just the head gasket. But now has to sell a "top end" kit for like $80+.
The old part # was 5014131AC from dodge/chrystler it was $42.70 Description is GSKT PKG-C.
Mitsubishi still sells the gasket separatly, but it is $10 more.

Kevin
The old:


The new:

i blew mine at around the same mileage. went with a copper one just in case.


98 esi A/t:
injen intake
n1 muffler
white gauges
17' adr sokodu's
coilovers 1.75' drop
obx front strut bar
3 stage metal headgasket
(should of rebuilt bottem when this was done but I'm stupid)

98 esi A/t:
injen intake
n1 muffler
white gauges
17' adr sokodu's
coilovers 1.75' drop
obx front strut bar
3 stage metal headgasket
(should of rebuilt bottem when this was done but I'm stupid)

hey where did you buy your head gasket the copper one

DsM Power Soon to be turbo yahhhhhh

don't know. my mechanic got it for me. i can ask.


98 esi A/t:
injen intake
n1 muffler
white gauges
17' adr sokodu's
coilovers 1.75' drop
obx front strut bar
3 stage metal headgasket
(should of rebuilt bottem when this was done but I'm stupid)

98 esi A/t:
injen intake
n1 muffler
white gauges
17' adr sokodu's
coilovers 1.75' drop
obx front strut bar
3 stage metal headgasket
(should of rebuilt bottem when this was done but I'm stupid)

Well, I was FINALLY able to pick up my car on Sat at the dealer - I took it in on Tuesday + the holiday didn't help. Anyway ... RxR Eclipse - I wish you were right - appearantly they don't "have too" b/c I am staring at my invoice sheet from the repair and I have the exact part # on here you listed which according to you is the old one - no MLS for me. %$*&# So I guess another 36,000 until I blow this one. For those of you who knew I was away for a month - I have now driven my car about 4 miles in the past 7 weeks - talk about withdraw!


In order:
Mirror Tint|Grillcraft grill|SprilMax|GST Exhaust|Front/Rear strut bars|EBC brakes|Brembo Crossdrill/slotted rotors|AEM CAI|NGK Plugs|Magnecor Wires|Konig VeloCT 17x7|Niitto 450's|55mmTB|

Next:Custom Short Shifter

1999 Eclipse GST 4G63

Hi,

Im at 150,000 miles. How can I tell if my headgasket is blown? I go tthe car at 100,000, and I have no clue what the people b4 did but I doubt they did anything really. Any signs for a blown head gasket?

I got banned for being a constant tard.

Damn Chris. Thats allright though. If it blows, we'll slap in a .022 copper job from http://www.headgasket.com/gaskets.html and bump you to 10.1:1 CR.

Mr. Pimp - check for oil in your antifreeze and antifreeze in your oil. It turns to a brownish goo when they mix - and is a definate sign of a blown headgasket.


ride__________95 Eclipse RS : 5 speed
power________Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback
suspention___BOMZ F/R upper strut bars : ES inserts
sound________Kenwood KDC 5000 : Audiovox 8" sub toob - no sub amp(damnit!)
shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear)
incomming___Hurricane F/R lower strut ties : Field SFC Hyper-R
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

I had the head gasket on my 98 RS go at 62,000 miles. The dealership said they wouldn't cover it so I wrote a long letter to Mitsubishi explaining that unless they replaced it I would sue them. They called back and said "Mitsubishi is offering to pay for the head gasket itself."

I retorted, and I quote, "Heeeeeellllll no, it's a $50 piece of gasket. I want the labor paid for as well because I'm not spending my time to fix it." The next day the dealership called and said to bring my car down, Mitsubishi was paying for everything and they extended my warranty to 100,000 miles bumper to bumper...

Ya gotta fight, but in the end a victory over Satan is worth the hassle.

Good luck,
Eric

that sweet^^^^

btw chris haha good deal at least its fixed for free i left a msg you me and jim gotta hang out sometime im saving for my rebuild and i think i could use an extra

Boca Raton, Florida
95 Eclipse GS- sold
99 Eclipse GSX- 386awhp
98 Eclipse GS- sold
92 Prelude