My car is going on the dyno tomorrow. I am probably only going to get one run to see what the torque curve looks like as my car stands now. This is because I am going with over 10 other owners from New England DSM so I won't have much time to do run after run to tune the car.
Because of this, I am not adjusting my SAFC or my cam gears, so the settings I ran 15.41 on are what it's going on the dyno with (hell, I drive around with those settings).
I am going to scan whatever dyno results I get, so I can have them posted ont he main board and so everyone can see the results. So Dino, expect an E-mail soon
Inthe future, I might try again depending on when another dyno day cn be set up, and depending on when I get the AFX computer Gary has been prototyping for me
#37172, "RE: Car is getting dynoed tomorrow" In response to Reply # 0
Sweet, can't wait to see your numbers! It will be nice to see a dyno of a nicely modded N/A car. I'm guessing your gonna be somewhere around 130whp....give or take 5hp......we'll just have to wait and see
#37173, "RE: Car is getting dynoed tomorrow" In response to Reply # 1
About damn time.
Good luck!
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#37175, "RE: Car is getting dynoed tomorrow" In response to Reply # 3
130 HP? I think that it will produce more. 130 WHP doesn't make 15.4s happen, I don't think. 15.4 is approaching what most stock GS-Ts run, and they have 210HP. I would guess 145 at the wheels, at the very least. I can't wait to see what winds up coming out of this. I don't think that he will blow up on the dyno... it is set up rock solid. No worries. -=B-=
Dude, Boeing called. They want their wing back.
Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate. Me: Can I put that in my sig? Dark0ne95: GO right fucking ahead.
#37176, "RE: Car is getting dynoed tomorrow" In response to Reply # 4
Yeah he better have more than 130 HP. When Skillionaire had his GS A/T running 7 psi he had dynoed at 170 HP and I ran him on the street from a roll and was dead even in 2nd and 3rd gears.
#37177, "RE: Car is getting dynoed tomorrow" In response to Reply # 5
i think he's fast cause he knows how to drive his car. i'm going to go ahead and guess a lower HP as well. the dyno doesn't care about your launch ya know.
#37178, "RE: Car is getting dynoed tomorrow" In response to Reply # 6
I agree with Amish on this one. Todds' car is fast because he can drive. I'm not saying thats the only reason of course, but I think that has a lot to do with it. I don't see any reason why anybody couldn't get a high 15(15.9XX) with just an intake on our cars. It can be done. I am officially gonna guess that he will fall somewhere between 135-145whp. The more I look at his mods, the more I can see 145whp. A gain of 30hp to the wheels is a big gain from just bolt-ons
#37179, "RE: Car is getting dynoed tomorrow" In response to Reply # 7
i'm saying 130WHP. i'm probably only putting down 110WHP, but i weigh a little less. todd get's good times cause he can drive, just look at his 60ft numbers.. hehe. but his car does seem to run really well.
#37180, "RE: Car is getting dynoed tomorrow" In response to Reply # 8
I'm going to have to guess more than 130HP. All i have on my car is GReddy headers, EVO exhaust, and AEM CAI, and i put down 124HP and 123pounds of torque. I'll have to make my guess at 150HP to the wheels. Good luck Todd.
Search
Printer-friendly copy
0 Users in Chat
