My car is going on the dyno tomorrow. I am probably only going to get one run to see what the torque curve looks like as my car stands now. This is because I am going with over 10 other owners from New England DSM so I won't have much time to do run after run to tune the car.

Because of this, I am not adjusting my SAFC or my cam gears, so the settings I ran 15.41 on are what it's going on the dyno with (hell, I drive around with those settings).

I am going to scan whatever dyno results I get, so I can have them posted ont he main board and so everyone can see the results. So Dino, expect an E-mail soon :)

Inthe future, I might try again depending on when another dyno day cn be set up, and depending on when I get the AFX computer Gary has been prototyping for me :)

Sweet, can't wait to see your numbers! It will be nice to see a dyno of a nicely modded N/A car. I'm guessing your gonna be somewhere around 130whp....give or take 5hp......we'll just have to wait and see :)

About damn time. :-)

Good luck!

good luck, dun blow yur shit........

130 HP? I think that it will produce more. 130 WHP doesn't make 15.4s happen, I don't think. 15.4 is approaching what most stock GS-Ts run, and they have 210HP. I would guess 145 at the wheels, at the very least. I can't wait to see what winds up coming out of this. I don't think that he will blow up on the dyno... it is set up rock solid. No worries. :D
-=B-=

Yeah he better have more than 130 HP. When Skillionaire had his GS A/T running 7 psi he had dynoed at 170 HP and I ran him on the street from a roll and was dead even in 2nd and 3rd gears.



________________________________________________________________________________________
current status - unknown
Project: Baby on the way


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

i think he's fast cause he knows how to drive his car. i'm going to go ahead and guess a lower HP as well. the dyno doesn't care about your launch ya know.

I agree with Amish on this one. Todds' car is fast because he can drive. I'm not saying thats the only reason of course, but I think that has a lot to do with it. I don't see any reason why anybody couldn't get a high 15(15.9XX) with just an intake on our cars. It can be done. I am officially gonna guess that he will fall somewhere between 135-145whp. The more I look at his mods, the more I can see 145whp. A gain of 30hp to the wheels is a big gain from just bolt-ons :)

i'm saying 130WHP.
i'm probably only putting down 110WHP, but i weigh a little less.
todd get's good times cause he can drive, just look at his 60ft numbers.. hehe. but his car does seem to run really well.

I'm going to have to guess more than 130HP. All i have on my car is GReddy headers, EVO exhaust, and AEM CAI, and i put down 124HP and 123pounds of torque. I'll have to make my guess at 150HP to the wheels. Good luck Todd.

I also think it will be between 127-130 whp :)

is it tomorrow yet? i want to see whos right,lol

YEAH WHERE'S THE NUMBERS?

________________________________________________________________________________________
current status - unknown
Project: Baby on the way


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

*waiting in anticipation*