Anyone have any idea why my belts squeak when its cold and rainy out? I just had them replaced along with the timing belt 1000k miles ago, so its kind of pissing me off. Makes the car sound like an old piece of garbage..Thanks.
1997 Eclipse GS AEM CAI Apex'i N1 Catback Greddy Header 5% window tint Front-Rear-Lower Rear STB's Yellow Painted Calipers 1st gen altezzas with original painted center piece Soon-Tokico Illum's or Blues
#36595, "RE: Belt Squeak" In response to Reply # 0
tension on the belts is not what it should be, on the cold days the belt gets harder and looses some of the friction it once had when its warm and the belt is nice and rubbery
#36597, "RE: Belt Squeak" In response to Reply # 2
i just had my shop fix my belts while i was getting work done. that alone took them a few hours to get it right and they stopped squeeking for about a week. i wouldn't worry too much.
98 esi A/t: injen intake n1 muffler white gauges 17' adr sokodu's coilovers 1.75' drop obx front strut bar 3 stage metal headgasket (should of rebuilt bottem when this was done but I'm stupid)
98 esi A/t: injen intake n1 muffler white gauges 17' adr sokodu's coilovers 1.75' drop obx front strut bar 3 stage metal headgasket (should of rebuilt bottem when this was done but I'm stupid)
#36598, "RE: Belt Squeak" In response to Reply # 3
if it took a shop a few hours to tighten your belts, they really suck. without ever touching the engine before, it shouldnt take more than 15 minutes.
for the power steering/ac belt, look for the tensioner behind the passenger side headlight. it will be above the a/c compressor and in front of the power steering pump (its the small pully). loosen the bolt (dont remove it) that runs through the pully into the mounting assimbly and runs perpindiculer with the length of the car. loosen that bolt (4ish full turns). then locate the bolt on the same assembly that runs parallel with the length of the car on the mounting assembly. tighten it towards the rear of the engine bay to add a little tension, then re-tighten the bolt that runs through the pully.
for the alternator belt: the same type of tensioner applies, but the bolt head to loosen the assembly is facing towards the engine instead of away from it (like the p/s on is). youll have to feel behind the bracket to locate it. loosen that and then adjust the second bolt (as per the p/s belt) to creat more tension.
listen first to check witch one is loose, you dont want to overtighten. the belts are supposed to deflect around 1/2" with roughly the pressure of one finger on them in the longest stretch between the pullies.
#36599, "RE: Belt Squeak" In response to Reply # 4
Mine did the same thing.....squeaking like crazy on cold or wet days and when it was nice and sunny never or whenever i would turn the wheel sharp. I got in there and tighted the belt up...NO MORE SQUEAKS!
Black Sapphire '96 RS w/ full Blitz kit
Performance: Apex'i N1 Exhaust AEM CAI Magnecore Plug Wires NGK BKR5E-11 Plugs Custom Short Shifter (AFX UDP) Coming Soon
Looks: Custom Blue Reverse Lights Custom Blue Interior Lights Blue Strobes in Headlights Blue LED Air Vent Mod Blue HVAC Lights Conversion (Thanks to Hondahater21) Indiglo Gauges Greddy Badge Shifter Knob Momo Shifter Boot Momo Race Pedals
#36602, "RE: Belt Squeak" In response to Reply # 7
i just tried to fix the same problem today.. mine was pleanty tight.. so it wasnt that... but when i sprayed the belt with silicone spray (i dont know.. one of the techs at the dealership i work at recomended it) it stopped for a while... but i dont know... maybe my belts are too tight?
Travis ************ Blue 93 Talon AWD Best Time 11.9 w/ 104 octane -Objects in mirror are getting thier asses kicked-
#36603, "RE: Belt Squeak" In response to Reply # 8
hey i a new member to this site.my belt did it to only when i had the air on.it was the alt. belt but i tightend it up and it aint done it since then but it might be summin else ............
#36605, "RE: Belt Squeak" In response to Reply # 10
For years I had a really squeaky P/S belt when it rained. It was that way when I got the car. It was because the idler pulley bearing was shot. There is a bearing in the center of that pulley. Try taking the pulley off. If you can wiggle the inner race on the bearing then that is probably your problem. The dealership charges approximately $150 for a replacement idler assembly - they don't sell the bearing or even just the pulley. The only sell the whole assembly brackets and all. The good news is that if this is your problem, you can get a $6 replacement bearing from McMaster Carr. I replaced mine and no more squeak. Here check it out. http://forums.2gnt.com/cgi-bin/dcforum/dcboard.cgi?az=show_thread&om=5296&forum=DCForumID13&archive=
ride__________95 Eclipse RS : 5 speed power________Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback suspention___BOMZ F/R upper strut bars : ES inserts sound________Kenwood KDC 5000 : Audiovox 8" sub toob - no sub amp(damnit!) shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear) incomming___Hurricane F/R lower strut ties : Field SFC Hyper-R
Search
Printer-friendly copy
1 User in Chat
