I have a 1997 Talon ESI 5-speed. It has 29000 miles. What should my next mod be? I have AEM Cold Air kit and Apexi N1 exhaust. My goal is low to mid 15's.

Thanks, Jason Mcclure

Get Energy Suspension Motor mounts if you don't already have them. The BEST $30 you will EVER spend on the car.

________________________________________________________________________________________
current status - unknown
Project: Baby on the way


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

The engine mounts will help performance and 1/4 mile times? Are they hard to install?

Thanks, Jason Mcclure

They will reduce your wheel hop on the take off's, letting you get a better take off. And there for beter 60's and then better 1/4 mile time. They are not that hard to install, the front takes about 20 min and the rear is a bitch to get to and can take some time. Just have Patience

Ryan

Clutch restrictor mod if not done yet.
Motor mount inserts
Header
Port and polish intake manifold

Then some cams.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines, AFX 55mm TB (re-installed once exhaust is done, intake was outflowing exhaust)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

What about wheels? Bigger wheels will help you corner better and better tires will also help you launch better, and even drop your 1/4 times. Just to be clear, bigger wheels will slow you down but better tires on stock wheels will help alot.

dfresh

will post more pics when front is painted

I'm waiting to do an under drive pulley. I'v heard that it is one of the best mods you can do for the $$$.

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

What is a clutch restrictor mod?


Brian

1998 Mitsubishi Eclipse RS

Mods: Airbox modification, NGK-BKR5E spark plugs. There was a filter at the end of the stock intake pipe, but i ran over it.

Brian
West Melbourne, FL

1998 Mitsubishi Eclipse RS(White)
1965 Ford Falcon

Mods: AF/X UDP, NGK-BKR5E spark plugs, Custom CAI. Best et...16.31 @ 85.50 mph with custom ram air intake.***That was with my old engine. I hydrolocked it, so now I have a completely stock engine***

Oh my! I forgot the UDP, yes definately well worth the money.

Clutch restrictor mod IMO is a must. I hated the feel of the stock clutch. Too indefinate, never a good feel, very indirect. You could pop the clutch and the clutch would only release so fast. Hated that. I have removed the restrictor and installed a SS clutch line, now all is good. It feel like a linkage clutch.

There should abe a link from the main page to a "how to"

In the Clutch slave cylinder there is a restrictor that only allow so much fluid to pass through. If you remove this you get full pressure to the cylinder and the clutch grabs quicker and better. The SS line is only $20 from Road Race, I recommend that too.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines, AFX 55mm TB (re-installed once exhaust is done, intake was outflowing exhaust)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

get a tranny swap...automatic baby.

----------------------------------------------------------------------------
home.comcast.net/~nappyjim/songs.html
home.comcast.net/~7291834avi/carputer/carputer.html
www.cardomain.com/id/napppyjim

*Proud Member of the Top Ten Post Whore Club*
*Proud And Co-Founding Member Of The Zoom Zoom Revolution*
nappyjim-3 Chip-0
No one likes you chip, go away.

Where's a good place to order these? MachV wants 99, and they're not branded..

FS: 2.5" Test Pipe 25 shipped