I have never installed anything in my engine. always paid someone to do it for me. I don't want to pay anymore because I want to learn how to do it myself.

So could someone please give me some kind of guide to follow on how to take off my stock intake and then install a new one. and i also need to put the air filter on the intake too.


Thanks.

http://www.geocities.com/
kelsted/MyClipse/

first open the filter box and remove the air filter and then take out the bolts holding the air box to the car

then remove the hose clamp holding the air filter tube to the throttle body near the firewall, unhook the hose coming from the valve cover and pull the old air tube out.

now install the new tube/clamps/filter and your done

Seriously this mod is almost idiot proof, you just remove the old parts and slap the new ones on, unles you ride the short bus to school (no offense to anyone who does) this is easier than putting pants on in the morning

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

first undo the elbow from the throttlebody. then work your way towards the airbox behind the front left headlight undoing all bolts/screws that are holding stock unit in place. remove stock unit. to install an aftermaket cold air intake, put the 2.5" X 2.5" coupler on the throttlebody, place 2.5" hose clamp on throttlebody side of the coupler. next, put 2.5" hoseclamp over side of coupler closest to the battery. then put air intake pipe(do not install filter until end) into the coupler. loosely tighten both 2.5" hose clamps. the aem/injen intakes use a rubber mount to hold the mounting bracket on the stock screw location. most other colad air systems require custom bracket modification. once all is loosely tightened, install air filter element from the underside of the car. the pipe will show right inside the left front bumper. tighten clamp loosely. now, review all parts, make sure you have installed everything. if air intake system needs to be moved, thats why you didnt tighten everything. move piping to best fit. starting from the throttlebody working towards the filter underneith the car, tighten all hiseclamps and mounts to maximum tightness. for a short ram air intake, use the same process for removing stock intake, but all lower mounts underneith the car will not be neccessary. the most common mount for a short ram intake is on the drivers side of the valve cover. once again, most intakes besides aem/injen require custom bracket modifications, for this, you may use pipe hanger strapping that you may buy at your local hardware store. i hope i helped, have fun, be safe, good luck!
later
chris

Don't apologize for being new. It really is an easy mod to start off with. All you need is a 10mm ratchet (maybe an open end too) and a flat blade screwdriver.

And welcome.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

which kind of intake did you get first of all, cuz I had to modify my ebay intake in order for it to fit.

Toney
'97 RS 5 Speed (totaled)
15.4606@88.42 Mph
96 Toyota Celica GT
88 Toyota Supra NA-T (w/ sports package)
Got Boost?? Hell yeah I-6 turbo powah baby!

i second i had to modify my 60$ ebay intake to make it fit also that would be harder for a begineer

if it was a known brand and everything fits right follow above instrustions and that should be it

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

my 30 dollar ebay intake fit just fine (cept it rubbed that battery)

turbo8u: "jiggle jiggle then vroom vroom pshhhh"
-Mike Pruett
2gnt member# 976
MOPAR Stage 2
SRTForums.com member #37 (Yeah, I signed up when it first came out, and ended up getting one, cool huh?)
"The object of war is not to die for your country but to make the other bastard die for his."
- General George Patton (1885-1945)

yeah that's gonna happen.....thought I was all cool when I painted My AEM intake to match my calipers and a few other things on the car.....got impatient about actually having a cold air intake....and put it on later that day.
Now I have a custom blue AEM with several really crappy looking silver patches.


~E~ 1999gs

~E~ 1999gs
AEM C.A.I./GS-T exhaust/Magnecore wires/Iridium Ngk's/Custom mesh Grill/Upper F/R strut tower bars/TB bored to 55mm/AFX UDP

Follow the instructions.

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica

>my 30 dollar ebay intake fit just fine (cept it rubbed that
>battery)

put a piece of silicone hosing over the battery brackets piece that hits your intake and it should stop it from messing up the intake.

~Sean

99 GSX
97 RS--SOLD

Installing my intake was the first mod I *ever* did to any car. I enjoyed it so much, now 2 years later, I've gone turbo and am rebuilding my whole engine for even more fun.

Here's pictures (of my iceman cold air intake install) :
http://www.signal11.com/~thedawg/car/iceman/index.html

Wow... hehe damn my engine bay used to be clean

thanks for all the responces.

yeah, the intake i got was $50 from ebay.

I was able to take off the stock intake, but not the airbox. I need to buy some more tools to take that off.

so when I tried to put the new one on, it doesn't seem to fit. the battery is in the way. I even tried picking up the battery then put in the intake and put the battery back where it goes. that didn't work.


so what else should i try to do?

Thanks.

http://www.geocities.com/
kelsted/MyClipse/

jam that fucker in there.....i did

turbo8u: "jiggle jiggle then vroom vroom pshhhh"
-Mike Pruett
2gnt member# 976
MOPAR Stage 2
SRTForums.com member #37 (Yeah, I signed up when it first came out, and ended up getting one, cool huh?)
"The object of war is not to die for your country but to make the other bastard die for his."
- General George Patton (1885-1945)