There is a really huge junkyard in my area that says they can get me a throttle body for my eclipse for $50, so I figure that I could use this throttle body and send it off to get bored...

However, the guy says it's a throttle body off of a manual eclipse, and I own an automatic.

Can I buy this thottle body off of a manual eclipse even though I have an auto? Let me know!

-Nick

it's all the same. THe TB is the same on both auto and manual. If the sensors are messed you can move it from your existing one to the new one. Getting it bored cost about $100 from howell. don't know about anyone else.


-Avenger
99 Eclipse RS out of the shop!!

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

Great news! Save me mad cash! I think there are some machine shops around here that can do some boring. =)

-Nick

Yep Howell is the cheapest around. I checked quite a few places and the running price is $250 to bore your throttle body. Go to Howell. Gary does a good job, and They returned mine in much less time than they predicted.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17.

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. Silver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads.

Waiting for from RRE: Front Lower Tie Bar, SS Clutch Line.

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

damn!! 250 to get your tb bored? it's on the average to have it bored paper thin for 75 around here..

where can i get it done for $75?



'98 GS AT
Magenta Gray Pearl
NGK Plugs and Wires
AEM Short Stack
GS-T Exhaust
Bored throttle body
Bored Intake manifold
AFX underdrive pulley
RRE Front Lower Bar

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar.Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.

how effective is having the bigger throttle body with stock intake manifold??? Is it worth the $100??? But i have heard that the stock 2gNT manifold is already 55mm i.d. and getting a bored throttle body is worth the money... can anyone confirm this?!

Yes it's worth it. If the intake manifold is 55mm (which it is) then having a throttle body smaller then that would be too restrictive. So, yes, do get a 55m throttle body.

My question is this... what if i wanted to bore the intake manifold more then 55mm? Will I gain more power or lose it?

-Nick

The stock Tb goes from ~55mm on the inlet side to 46mm at the butterfly to 55mm at the intake manifold. So boring it out to 55mm is very helpful. The intake manifold inlet is already 55mm. So no porting of the intake manifold inlet is needed.

55mm is as big as you can go with the stock TB, there isn't enough material to bore more. Supposedly you can bolt on a 60mm TB from a minivan. I don't know about this or not, but I've heard it can be done. Then the manifold would need to be opened up on the inlet. More airflow is generally better but you can get too much. Somethingthat say your head or exhaust manifold can't get out fast enough then you aren';t doing any good.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17.

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. Silver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads.

Waiting for from RRE: Front Lower Tie Bar, SS Clutch Line.

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.