I need a little help. MY eclipse will not start but it turns over with out a problem. I looked up these codes and have found that they are pointing at the MAP sensor Is there anyway to check this sensor before I go buy a new one, and is there anything else I should check with these codes... Thanks
96GS Preformance AEM Short Air Intake, NGK Plugs/Wires, GS-T Muffler Interior Indiglo Gauges, Complete Blue LED Dash light Mod (Including Sig Lighter)..
#31999, "RE: Car will not start CEL codes 13,14" In response to Reply # 0
Im sure you can check the resistance across the terminals but Im at work and dont have my chiltons to see what those values should be, I would just check first to make sure its actually plugged in
#32000, "RE: Car will not start CEL codes 13,14" In response to Reply # 0
Well I changed the MAP but with same results any suggestions on what I should check or do ??? anyone...
96GS Preformance AEM Short Air Intake, NGK Plugs/Wires, GS-T Muffler Interior Indiglo Gauges, Complete Blue LED Dash light Mod (Including Sig Lighter)..
#32002, "RE: Car will not start CEL codes 13,14" In response to Reply # 3
I gave up and pushed it next door to a local auto shop...
96GS Preformance AEM Short Air Intake, NGK Plugs/Wires, GS-T Muffler Interior Indiglo Gauges, Complete Blue LED Dash light Mod (Including Sig Lighter)..
#32003, "RE: Car will not start CEL codes 13,14" In response to Reply # 4
ohhh you wimped out j/k. please report what they find out as to what was the cause, seems to be alot of people lately with troubles starting their car.
#32004, "RE: Car will not start CEL codes 13,14" In response to Reply # 5
"ohhh you wimped out j/k."
Yeah I wimped out. Ha
If I had more time to deal with it I would No call from them yeat I will let you know what was causing my problem
96GS Preformance AEM Short Air Intake, NGK Plugs/Wires, GS-T Muffler Interior Indiglo Gauges, Complete Blue LED Dash light Mod (Including Sig Lighter)..
Search
Printer-friendly copy
2 Users in Chat
