Ok yesterday we got the motors swapped and the new one bolted in. Today we got all the wiring hooked up but we spent most of the day trying to get the axles back in. What I need to know is the green thing supposed to be all the way in and touching the tranny? We spent hours on the and even used a wedge and a 20 pound sledge to try and get those things in. They popped in but there is still about 1/4" of metal showing between the green thing and tranny. It will not go any farther. I really can't remember how it was before I took them off. The wheel end of the axle is in and the suspension is bolted back up. When we have the motor running the axles spin really slow while in neutral. Remember we are still on jackstands. So to sum it up I need to know if the spinning is ok and if the axles are in all the way. If they aren't then how in the hell do I get them in? Thanks for any help.

the axles will spin when in neutral and both wheels are off the ground. And the green part won't go all the way into the tranny. All you need to do is have someone spin the axle while you jiggle and try to push it all the way in and it will go in all the way. sounds like to me that they are in all the way already though.

sounds like your having fun getting everything back together. I just got done pulling my tranny again. Looks like my car is down for another couple days.

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

Sorry about your car but you just made me feel so much better. THANK YOU for the quick reply.

also.... put some tranny fluid in and see if you leak out at all where they go into the tranny.

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

I'm almost 100% sure there is no fluid leaking. I'll double check this evening though.

Yep, its all the way in. When Matt_95tgs and I put his tranny back in, the same happened to us. We had about 1/4" of metal left before the green part, wouldnt go in any farther. Thats how it is supposed to be...

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Yeah sounds like they are in to me. If you are in douibt pop them back out and push them in until you hear the click of the ring locking in place. But I wouldn't worry.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.