Well, my head gasket is leaking and it's time to get it chagned. Since the head was going to be off, i was thinking about doing some top end work. I was planning on getting some cams and gears, but then checked out the top end kit from howell. My question is, are the rockers, lifters, and springs worth the money?? Will i notice any power increase with them...thanks

______________________________________________________
2003.5 M3
99 M3
99 GST

if your putting a cam in, you will definately want the new springs/retainers, depending on the grind you may be putting more stress on the stock components causing them to fail. and also if its the pt cruiser lifters which i thought it was then they also have a larger oil hole in them which will keep the top end better lubricated, someone on here has a picture comparing stock vs. pt lifters and the difference is totally noticable

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

hey thanks alot for the info....i think instead of doing the head work i decided to put that money into the bottem end kit to make it ready for the turbo! But thanks for the information, i do plan on doing the top end work later!!

______________________________________________________
2003.5 M3
99 M3
99 GST