Okay, Raizin's post about his Crower modified camshaft got me thinking. If Crane can't make us a cam that is going to be specific for our car, why not get a set of cams and for $80 get a set made to the specs I want. So then the question is what specs do I want? Used cams plus the $80 to regrind will probably be cheaper anyway.

Here's the Crane specs
Street Duration 242@006 Lift .354" idle to 6500rpm
Drag Duration 250 @006 Lift .374" 2000-7200rpm
High Compression Drag 258@006 Lift .394" 2500-7500rpm

I'm thinking that immitatin the Drag grind would be good.

Any suggestions or comments? Maybe different specs for intake and exaust? What do you guys think?

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. RRE FL Tie Bar(Well Almost), Slver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads (Well Almost)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

I talked to Brian yesterday from Crower about some blanks and he said he doesn't have any BUT. They are working on cams for OUR 420a. He said it will be about 2-4 months. As for the specs you can check Howell's site they give lift, etc...

Skrilla
'97 Base Talon NA
"Technology: The Only Replacement for Displacement"
"Peace and Turbo Grease"

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

Could they really make some custom cams if they were sent both cams?



KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

I've been hanging around Ramiro at Crower for the past two days (BTW if you want his direct number it's 619 407-4626) trying to get him to make me some billet cams for turbo application. But anyway.. I was able to get him to pull out my ticket from when he reground my cams.. I could scan it and post it.. but I thought I'd just share the specs for now.

intake: duration 245 degrees lift .276
exhaust: duration 248 degrees lift .323 clearence is at .00

specs listed are based on a rockerarm ratio of 1.50 on both intake and exhaust

Info on degreeing the cam

intake: opens -11.0atdc
closes 21.0abdc

exhaust: opens 32.0bbdc
closes -16.0btdc

lobe separation 110 degrees

duration at .050"

intake 190 degrees
exhaust 196 degrees

lobe lift

intake .184
exhaust .215

if using lobe center method of degreeing, cam should be installed on an intake centerline of: 106 degrees

Howell is where I got the Crane specs I posted. If Crower is working on new Billet cams for us, I can just wait, I don't have the money for them now, damn bills! I'd have to wait till I had the cash for the head work anyway, just doing it all at once. Of course, I had my hopes up for the Crane cams... so we'll see.

My only other question is how radical do you think I can get before I won't pass emissions? We have the lovely new dyno style emissions tests here in Chicago. By the time I install I'll have an S-AFC installed so that can help... What do you think?

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17.

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. Silver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads.

Waiting for from RRE: Front Lower Tie Bar, SS Clutch Line.

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Emissions restrictions here in Cali are so strict compared to most other states. Even with the mildest cams you will not pass smog. But I heard there was a "trick" to degreeing your cams so that you do.