Does anyone on the board have crane cams? How hard were they to install and are there any special precautions or things that I should make sure I do or replace? I've already bought valves and springs is there anything else that has to be replaced? Thanks

With new cams you'll want to replace the camshaft oil seals. You may want to do the 60K maintenance while you're in there(if its time) - timing belt, water pump, idler pulleys, and tensioner. You also may want to consider a new valve cover gasket and upgrading to the PT style rockers and lash adjusters. Sounds like you're also doing a valve job, don't forget to get a new head gasket.

Good luck.


95 Eclipse RS : 5 speed
Gude cams : test pipe : AFX UDP : ram air : Thrush glasspack : Dual air horns : Kenwood KDC 5000 : AutoCommand remote start
incomming - lower strut bars

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html