That if you stick a TB from a automatic neon(55mm), on a stick neon(49mm), you gain some Hp. Does anyone know if the Auto. TB from a neon would fit on a stick eclipse? It seems like a good idea.
#24244, "RE: Auto. Neon throttle body" In response to Reply # 0
uhh... you need to read up on this board a little and look at the upgrade stages on the main webpage. Seriously... do a search for bored throttle body. It seems there are 2 options for a bigger TB right now, get yours bored by Howell Automotive or Advanced Racing Dynamics, or hook up the Jeep Cherokee TB switch. Seriously though... read some archives!
Tim trwebb26@yahoo.com White 1999 GS - Manual Tranny Mods: B&M Shifter, Symbroski Shifter Kit, RRE SS Clutch Line, AEM Short Ram Intake, Clear Side Markers, GS
#24248, "RE: Auto. Neon throttle body" In response to Reply # 0
Actually it would most likely hurt you HP number. One thing you want to do is open the air flow. On our N/T cars we bore our throttle bodies out to 55mm or put on a 60mm Jeep throttle body. The Neon boyz started putting the Jeep TB's on their cars and the next thing you know we have guys putting them on our cars. Bigger is always better where air flow is involved.
99RS 55mm TB AFX/UDP AEM CAI Eibach sportlines Energy Engine Mounts Tokico Illumina struts 16" Black PCM Wheels OBX Bomb B&M Short Throw Shifter Symborski Shifter Kit MSD 8.5 wires
#24252, "RE: Auto. Neon throttle body" In response to Reply # 6
Bigger is better for airflow and the more air your TB can flow the better horsepower you can make. Putting a smaller TB on is like restricting your engine from breathing. (Sample: NASCAR makes the Winston Cup cars run restrictor plates on the superspeedways to slow the cars down.) Putting a smaller throttle body on is like running a restrictor plate. Any more quesitons? Not that I would know the answer
99RS 55mm TB AFX/UDP AEM CAI Eibach sportlines Energy Engine Mounts Tokico Illumina struts 16" Black PCM Wheels OBX Bomb B&M Short Throw Shifter Symborski Shifter Kit MSD 8.5 wires