http://www.geocities.com/aspen_14617/catchcan.html

Made from an old vitamin bottle, an APC (A Piece of Crap) breather filter, and some misc. pipe fittings.... I think it works ok

Gary

hey not bad. imo cool. i should make one too. i need one.

"Proud to be, a 2gnt" (was)


-mitsuman

Turbo:
1. HRC STG 2
2. Blits SS BOV

Exhaust:
1. Greddy Power Extreme

Exterior:
1. C/F hood du!!

Ride:
1. Motegi MR7 17'' wrapped
in yokohama A550v
235/45/17
2. H&R Sport Springs

Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn
amp

Electronics:
1. HKS TT(sitting in room)
2. Apexi S-afc(sitting in
room)
3. Corbin's A/F
guage(sitting in room)

Body:
1. Blitz front end(sitting in
room)

Fun mods:
1. "Nozzel mod"

Wanted:
1. Injectors
2. Howell rebuild kit.

-mitsuman 95 GS 5-spd w/97-99 front end
Repin The SoCal 2GNT'ers
mitsuman95@hotmail.com
AIM s/n : mitsuman95gs

hey that's ones not bad I've seen ghettoer! People use coke bottles, oil bottles, brake fluid bottles, windsheild reservoirs, coolant reservoirs, etc... How'd ya make it? Just get some bottle and find a way to attack the small ass breather filter on top of it?

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

>hey that's ones not bad I've seen ghettoer! People use coke
>bottles, oil bottles, brake fluid bottles, windsheild
>reservoirs, coolant reservoirs, etc... How'd ya make it?
>Just get some bottle and find a way to attack the small ass
>breather filter on top of it?

Howdy,
I used an old vitamin bottle (it's about the size of a small coke can, only shorter.. then drilled a hole in the cap and used a flared female->female pipe coupling thingy (nipple? haha), and a little umm what the hell's it called.. an NPT? it's like the thing you hook the hose onto.. anyway, i used some o-rings to seal it and used some nuts to secure them to the bottle.. then just taped it with black tape (until i get off my ass & paint it).. i'll take a picture of it off the car tonight.. It took all & all about ~$20/25 to make.. Not too bad..

Gary

http://www.geocities.com/aspen_14617/can2.html

All it needs now is a coat of real paint instead of the ghetto tape and it'll be nice..

Gary

How hard is it to get the oil out of there to put back into the system?

Do you just tap the bottle and twist the cap?


Great work! -Soular

"There are only stars in the sky because the Moon has blocked the Sun from view" -Soular

The cap just screws off.. I dunno about pouring it back in.. Just pour it like you normally would.. But i'd use fresh oil

Gary

>tap the bottle and twist the cap?

hehee

-Joe
___________________________________
White 98 Eclipse GS MT
Star Stage 2
*Stolen - 10/24/03*

Ghetto????????? I put one of these things on my 1986 Opel Kadett 1.3l!! (I'm in Germany)There was a hose going into the intake, so I pulled off, plugged the hole, and ran the hose into a crunched up Coke can, with an added hole in the top. It really stunk when I was at a light, so I took it off. I left the can under the hood for that alled exhaust rattle. There's some nasty shit inthe can too. I think it was good for .2 hp on my 60 hp beast. Not bad!

"Life isn't like a box of chocolates...it's more like a jar of
jalapenos.
What you do today, might burn your ass tomorrow."